User manual NEC VT45K

[. . . ] LCD Projector User's Manual LIMITED WARRANTY Except as specified below, the warranty that may be provided by the dealer covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. Any product on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from; a. [. . . ] VIDEO Button Press this button to select a video source from a VCR, DVD player, laser disc player or document camera. S-VIDEO Button Press this button to select an S-Video source from a VCR. RGB Button Press this button to select an RGB source from computer or component equipment connected to your RGB port. Auto Adjust Button Use this button to adjust Position-H/V and Pixel Clock/Phase for an optimal picture. Some signals may not be displayed correctly, or in some cases it may take some time for a source to switch between sources. Select ( When you are in the Computer mode, these buttons work as a computer mouse. When you are in the Projector mode, which is indicated by lighting the PJ button: : Use these buttons to select the menu of the item you wish to adjust. : Use these buttons to change the level of a selected menu item. Enter (Left click) Button When you are in the Computer mode, this button works as the mouse left button. When you are in the Projector mode, which is indicated by lighting the PJ button: Use this button to enter your menu selection. It works the same way as the "Enter" button on the cabinet. Remote Control OFF ON POWER VIDEO S-VIDEO RGB AUTO ADJ. 1 2 4 5 6 7 10 11 NT 3 8 MENU 9 SELECT L ER PJ CA NC E 12 13 E 14 15 HELP FREEZE PIC-MUTE MAGNIFY 17 16 VOLUME 18 12. CANCEL Button When you are in the Computer mode, this button works as the mouse right button. When you are in the Projector mode, which is indicated by lighting the PJ button: Press this button to exit "Menus". It works the same way as the "Cancel " button on the cabinet. PJ Button Press this button to switch the Select, Cancel, and Enter buttons between the Projector mode (lit red)and the Computer mode. Press this button or any one of the Power ON/OFF Menu, Help and Magnify buttons to switch to the Projector mode and the PJ button lights red. To switch back to the Computer mode, press the PJ button again. HELP Button Provides information about the current signal and the status of the projector. Magnify Button Use this button to adjust the image size up to 400%. Freeze Button This button will freeze a picture. Picture Mute Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound. [. . . ] Reset the settings or adjustments to factory preset levels using the Factory Default on the Image Options Menu. See page E-33. No picture Image isn't square to the screen Picture is blurred · Reposition the projector to improve its angle to the screen. · Use the Keystone on the Image Options Menu to correct the trapezoid distortion. · Reposition the projector to improve its angle to the screen. [. . . ]