User manual NEC VT560

[. . . ] Portable Projector VT660K/VT560/VT465 User's Manual LIMITED WARRANTY (USA and Canada only) NEC SOLUTIONS' PROJECTOR PRODUCTS NEC Solutions (America), Inc. (hereafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms. HOW YOU CAN GET WARRANTY SERVICE 1. To obtain service on your product, consult the dealer from whom you purchased the product. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage. [. . . ] Contact your NEC dealer if you need a mirror. If you're using a mirror and your image is inverted, use the MENU and SELECT buttons on your projector cabinet or your remote control to correct the orientation. (See page E-27. ) E-12 Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software. * If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER button again to resume. Connecting Your PC or Macintosh Computer Audio cable (not supplied) RGB signal cable (supplied) To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one. IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) PHONE PHONE NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port. IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type) Connecting your PC or Macintosh computer to your projector will enable you to project your computer's screen image for an impressive presentation. To connect to a PC or Macintosh, simply: 1. Turn off the power to your projector and computer. Use the supplied signal cable to connect your PC or Macintosh to the projector. If the projector goes blank after a period of inactivity, it may be caused by a screen saver installed on the computer you've connected to the projector. E-13 To connect SCART output (RGB) Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. 1. Turn off the power to the projector and your video equipment. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the RGB input of your projector and a SCART output (RGB) of your video equipment. Turn on the power to the projector and your video equipment. Use the RGB button on the remote control to select the RGB input. Press the MENU button on the remote control to display the menu. From the menu, select [Advanced] [Signal Select RGB] [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector. NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more information. NOTE: Audio signal is not available for this connection. RGB IN Projector Video equipment such as DVD player To RGB IN Commercially available SCART cable Female ADP-SC1 Connecting an External Monitor Audio cable (not supplied) PHONE RGB signal cable (supplied) RGB signal cable (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog image you're projecting. Turn off the power to your projector, monitor and computer. [. . . ] Service Options: There are 3 types of "Service" available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time. [. . . ]