User manual NEFF C77V60N2

[. . . ] You should also note the enclosed quick reference guide. This fully automatic espresso machine is designed for preparation of small amounts of coffee for domestic use or for use in noncommercial, household-like environments, such as staff kitchens in shops, offices, agricultural and other small businesses or for use by guests at bed-and-breakfast establishments, small hotels and similar residential facilities. It should only be filled with fresh water and the substances described in these instructions (coffee, cleaning/descaling agents). Use indoors and at room temperature only. [. . . ] The following setting options are available to you: Language: Press the navigation button (4) to select the display language. Cup volume: The per-cup quantity can be set separately for each type of drink and each cup size (“Set per-cup quantity” on page 46). Water hardness: Press the navigation button (4) to select the required water hardness (1, 2, 3 or 4) (refer also to “Checking and setting the water hardness”). Coffee temperature: Press the navigation button (4) to set the coffee temperature. Auto off after: Press the navigation button (4) to enter the time span after which the appliance should automatically switch to “energy saving mode” following the last drink preparation. A time between 5 minutes and 8 hours can be set. The default time is one hour, but this can be shortened to save energy. Contrast: The display contrast can be set from – 4 to + 4 with the navigation button  (4). Illumination: The lighting can be set to Off, On (factory setting) or Off after 5 min. Water filter: Each time a new water filter is inserted in the water tank (8), it must be rinsed: 1. Place the water filter in the water tank (8) and fill the tank with water up to the “max” mark. The display will guide you through the programme. Remove filter  Y If the water filter is activated, the following message is displayed: Add 0. 5 l water and descaler  Y Remove the water filter and press z (6). Pour lukewarm water into the empty water tank (8) up to the “0. The descaling programme now runs for about 20 minutes: If there is not enough descaling fluid in the water tank, the following message is displayed: Empty drip tray Replace drip tray Cleaning Empty the drip tray (18). Descaling Open drawer Clean and refill water tank  Y Pour lukewarm water into the empty water tank (8) up to the “0. Rinse the water tank and refill it with fresh water up to the “max” mark. σY Place a container with a capacity of at least one litre under the milk frother (19). The appliance rinses twice: Place container under milk frother Descaling Cleaning Cleaning Empty drip tray Open drawer Insert cleaning tablet!Deploy the appliance and open the drawer (10). Drop a cleaning tablet in the drawer and close the drawer again. [. . . ] The milk frother or its holder is Clean the milk frother or its blocked. The milk frother or its holder is Clean the milk frother or its blocked. The milk frother (19) is not correctly assembled. Wet the milk frother parts and press together firmly. [. . . ]