User manual NERO NEROROBO QUICKSTART GUIDE

[. . . ] Quickstart NeroROBO Ahead Software AG Information concerning copyright and brand names NeroROBO Quickstart and all its contents are protected by copyright and remain the property of Ahead Software AG. This Users' Handbook contains matter that is protected by international copyright laws. No part of this handbook may be reproduced or transmitted in any shape or form, without the express written permission of Ahead Software AG. All brand names and brands are the property of their respective owners. [. . . ] This means that orders can be carried out more quickly. NeroROBO Installing and configuring the desktop duplication system · 8 Use left recorder This checkbox should only be used when the robot is equipped with two recorders. First, select the position of the desired recorder. To select the left recorder, check the 'Use left recorder' box. To select the right-hand recorder, simply leave the box unchecked. To verify the recorder position, click on the 'Check recorder tray' button. The drawer of the selected recorder will now open for a short time and then close again. If the robot is controlling recorders with various names, the positions of each of the recorders will also be stored. If these positions are changed at any time, a warning will appear that you will have to acknowledge before the new configuration data can be stored. If recorders of the same name are connected to the same FireWire (IEEE 1394) interface, they may have to be reconfigured after Windows has been restarted because Windows does not always allocate the recorders the same port ID. NeroROBO Installing and configuring the desktop duplication system · 9 6. If you wish to burn and also print a label for the blank CD, you need to select the required printer first. To do this, click on the 'Select Printer' button to start the selection dialog. The self-opening dialog window will now display the standard printer settings for your computer. Now click on the drop-down button next to 'Name' and select from the list of printers connected to your computer the one that is connected to the robot. 7. Now click on the 'Start robot test' button to verify the robot settings. The robot will now select a medium from the 'In' pile and, depending on the current settings, pass each of the stations (recorder, printer) and place it in the 'Out' pile. 8. If you now wish to burn several rewritable but not empty CDs, the robot can now completely erase the contents of these media before rewriting them with new data. If this is the case, then simply check the 'Erase not empty rewritable media' box. Even if several recorders are installed, you can also command the robot to erase the contents of multiples of CD-RW media simultaneously. To find out how this works, go to the 'Erasing multiple CD-RW media simultaneously' section. NeroROBO Installing and configuring the desktop duplication system · 10 9. To check the recorder, simply click on the 'Check recorder tray' button. The drawer of the selected recorder will now open for a short time and then close again. This check not only serves to ascertain whether a blank CD is in the drive or not, but also tests the recorder's correct connection and response. 10. Repeat the configuration steps 2 to 8 for all recorders you wish to use and then click on 'OK' to accept the settings and close the dialog window. NeroROBO Installing and configuring the desktop duplication system · 11 3 Erasing multiple CD-RW media simultaneously A desktop duplication system allows you to erase several CD-RW media simultaneously. Select 'Recorder' from the menu bar and then the 'Erase ReWritable' command. The Erase CD-RW window will then open. 2. Then click on the drop-down button and select the desired erasing method. NeroROBO Erasing multiple CD-RW media simultaneously · 12 3. If the robot is controlling several recorders that you wish to use, then check the 'Use Multiple Recorders' box. 4. [. . . ] The dialog window prior to starting the writing process shows the custom text fields that have been created with Nero Cover Designer. NeroROBO Expert settings · 19 1. Mark the desired field and click on the 'Edit' button. NeroROBO Expert settings · 20 2. Mark the desired dynamic content that is going to replace the marked cover element. Dynamic, in this case, means that the text on the cover of each burned CD may differ from that of the last, although it is optional. In the above example, all four cover elements have been used. [. . . ]