User manual NERO NEROVISION EXPRESS 2 HOW TO CREATE A BASIC DVD

[. . . ] This brings up the NeroVision Express 2 Main Window. This brings up the `Content' window. From here you can add Video Files, or Capture video directly. Use this window to select your Video files for this project. [. . . ] Click on the Transitions button located in the top right of the window. 11. Now simply select any of the transition options, such as `3D ­ Exploding Cubes', and drag and drop into the Storyboard window as seen below. 12. Once you have all your transitions selected, click on `Next' to continue. 13. This brings you back to the `Content' window. Now we are ready to set up our chapters. This brings up the `Create Chapters' window. You have a few options on how to create a chapter. The simplest way is to use the `Auto Detect Chapters' feature. To do this, just click on the button highlighted with the red box in the picture below. 15. You can control the sensitivity, the higher the sensitivity the more chapters there will likely be. You can also change the minimum chapter length. 16. You can also manually enter in the chapters. Just click anywhere in the movie and then click on the `Add Chapter' button. The `Add Chapter' button in the picture below is shown with a red box around it. You can also move the chapters around by clicking on them and then dragging them to the point you desire. Once you have added all your chapters, click on `Next' to continue. 17. This brings you back to the `Content' window. We are now ready to move on to creating the Menu. [. . . ] If all looks fine, click on `Next' to continue. 24. This brings us to the final `Burn Options' window. Here you will select what model DVD Recorder and/or Image Recorder to burn too, or choose to write to your Hard Drive as VOB, IFO, and BUP files. And then just click on the `Burn' button to begin the write process. 25. [. . . ]