User manual NETGEAR D6300

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support. [. . . ] Block the traffic covered by this rule, unless it is blocked according to the schedule specified on the Schedule screen in Schedule for Firewall Rules on page 82. ALLOW rules are useful only when the traffic is already covered by a BLOCK rule. You would use these rules when you want to allow a subset of traffic that is currently blocked by another rule. These settings determine which computers on your network are affected by this rule, based on their source (LAN) IP address. All local IP addresses are covered by this choice. You have to fill in the Start and End fields when this option is selected. Enter the required address in the Start field. These settings determine which Internet locations are covered by the rule, based on their destination (WAN) IP address. All Internet IP addresses are covered by this choice. You have to fill in the Start and End fields when this option is selected. Enter the required address in the Start field. This setting determines whether traffic covered by this rule is logged. Select the action you want: • Always. This choice always logs traffic that is covered by this rule, whether it matches or not. (This feature is useful when you are debugging your rules. This choice never logs traffic covered by this rule, whether it matches or not. Click Apply to have your changes take effect, or click Cancel to return to the previous screen. To allow or block an inbound service, click here to set up inbound firewall rules for gaming or other applications. You are redirected to the Port Forwarding/Port Triggering screen as described in Port Forwarding and Triggering on page 102. Add Custom Services to Allow or Block You can define your own incoming and outgoing custom services to allow or block. Once you add your own custom services, they are available on the Outbound Services screen (as described in Firewall Rules on page 78) and the Inbound Services screen (as described in Port Forwarding and Triggering on page 102). The Add Service screen displays: The Add Service screen allows you to specify or edit your own custom service definition. [. . . ] 134 D6300 WiFi DSL Modem Router FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]