User manual NETGEAR DGND4000

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support. [. . . ] The interval at which the statistics are updated in this screen. To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval. administration 86 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 To stop the polling entirely , click Stop. Connection Status Button On the Router Status screen in the Internet Port pane, click the Connection Status button to view connection status information. View connection status information The Release button returns the status of all items to 0. The Close Window button closes the Connection Status screen. The IP address that is assigned to the wireless modem router. The subnet mask that is assigned to the wireless modem router. The IP address for the default gateway that the wireless modem router communicates with. The IP address for the Dynamic Host Configuration Protocol server that provides the TCP/IP configuration for all the computers that are connected to the wireless modem router. The IP address of the Domain Name Service server that provides translation of network names to IP addresses. The date and time when the lease was obtained. The date and time that the lease expires. 4 GHz) and Wireless Settings (5 GHz) The following settings are displayed: Name (SSID). The wireless network name (SSID) used by the wireless modem router. The default names for the 5-GHz ends in -5G to distinguish it from the 2. The geographic region where the wireless modem router is being used. It might be illegal to use the wireless features of the wireless modem router in some parts of the world. Identifies the operating channel of the wireless port being used. When Auto is selected, the wireless modem router finds the best operating channel available. If you notice interference from nearby devices, you can select a different channel. Channels 1, 6, and 11 do not interfere with each other. [. . . ] Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. 151 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]