User manual NETGEAR FA310TX INSTALLATION GUIDE

[. . . ] Make sure the network card is fully inserted into the slot to prevent the PC operating system from freezing at startup. Fasten the network card to the rear of the computer chassis by tightening the screw that is on the PC. Replace the PC cover and reconnect the power cord to the PC. Network card Back plate removed 7983FB Model FA310TX Network Card Installation Guide Connect the Network Cables Using the appropriate UTP cable, connect any port on a network hub to the port on the network card. Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push button. [. . . ] If you have a disk or CD-ROM that came with this device, insert it now. It is recommended that you let Windows search for an updated driver. To do this, click Next to continue. < Back Next> Cancel Insert the FA310TX Drivers and Diagnostics Disk in Drive A, and then click on "Next. " Model FA310TX Network Card Installation Guide 4. Update Device Driver Wizard Windows found the following updated driver for this device: NETGEAR FA310TX Fast Ethernet PCI Adapter If you want to use this driver, click Finish. If this is not the correct driver and you want to search for a different driver manually, click Other Locations. Location of Driver Other Locations. . . < Back Finish Cancel Click on "Finish. " 5. Copying Files. . . The file NDIS2DOS\NGRPCI. dos on Windows 95 CD-ROM could not be found. Insert Windows 95 CD-ROM into the drive selected below, and click OK. OK Cancel Skip File Details. . . Copy files from: A:\ Type A:\ in the "Copy files from" entry field and click on "OK. " 6. Remove the Drivers and Diagnostics Disk from the floppy drive, remove the Windows 95 CD-ROM from the CD drive (if you have inserted it), and then click on "Yes. " Restarting your system is necessary to enable your PC to finish setting up your new hardware. Proceed to "Verify Installation. " Model FA310TX Network Card Installation Guide Verify Installation 1. Double-click on "My Computer" on the desktop, double-click on "Control Panel, " and then double-click on "System. " 2. Click on "Device Manager. " Model FA310TX Network Card Installation Guide 3. Double-click on "Network adapters. " 4. If there is a problem with the installation of the driver, an exclamation point appears next to "NETGEAR FA310TX Fast Ethernet PCI Adapter. " If there is an exclamation point, double-click on "NETGEAR FA310TX Fast Ethernet PCI Adapter. " The "Properties" window opens, and a message regarding the status of the device is displayed in the window. Continue to click on "OK" or click on the "X" in the right hand corner to close any open windows and return to Windows 95. Model FA310TX Network Card Installation Guide Technical Specifications Model FA310TX Network Card Standards Compatibility IEEE 802. 3u, 100BASE-TX Fast Ethernet IEEE 802. 3i, 10BASE-T Ethernet NetWare tested and approved Microsoft Windows, Windows 95, Windows NT® compatible PCI Plug-and-Play compatible +5V +/- 5% @ 630 mA maximum 5. 125 x 2. 813 in. 13. 02 x 7. 15 cm . 20 lb (90 g) 0° to 40° C 10% to 90% noncondensing CE mark, commercial FCC, Part 15, Class B EN 55 022 (CISPR 22), Class B Canada ICES-003, Class B Interface Options RJ-45 connector for 10BASE-T or 100BASE-T Ethernet interface DC operating voltage Physical Specifications Dimensions Weight Environmental Specifications Operating temperature Operating humidity Agency Compliance Model FA310TX Network Card Installation Guide Hardware Warranty Information Thank you for selecting NETGEAR products. Subject to the provisions described below, this NETGEAR product is protected by a limited lifetime warranty from defects in material and workmanship. Should a product fail to perform as described above within the first year following the original date of purchase, NETGEAR will ship a replacement for the failed product upon return of the defective product. Products that fail after the first year following the original date of purchase will be repaired or replaced with the same or functionally equivalent, product by NETGEAR, at its discretion, free of charge provided you (1) have, within 30 days of the original date of purchase, completed and returned the Owner Registration Cards which accompanied the products when shipped, (2) return the failed product to NETGEAR designated repair facility with shipping charge prepaid, and (3) provide NETGEAR with proof of the original date of purchase. Repaired or replacement products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If NETGEAR, by its sole determination, is unable to repair or replace the defective product, it will refund the depreciated purchase price of the product. This warranty does not apply if, in the judgement of NETGEAR, the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained in a manner not conforming to product manual instructions, has been modified in any way, or has had any serial number removed or defaced. Repair by anyone other than NETGEAR or an approved agent will void this warranty. The maximum liability of NETGEAR under this warranty is limited to the purchase price of the product covered by the warranty. Prior to returning any defective product, the end customer or the reseller from whom the end customer originally purchased the product must obtain a Return Materials Authorization (RMA) number from NETGEAR. All defective products should be returned to NETGEAR with shipping charges prepaid. NETGEAR will not accept collect shipments. [. . . ] · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity NETGEAR Model FA310TX Network Card Tested to comply with FCC Standards FOR HOME OR OFFICE USE EN 55 022 Statement This is to certify that the Model FA310TX Network Card is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). [. . . ]