User manual NETGEAR R7000 COMPATIBLE CHROME CAST

[. . . ] Nighthawk AC1900 Smart WiFi Router Model R7000 User Manual February 2015 202-11301-07 350 East Plumeria Drive San Jose, CA 95134 USA Nighthawk AC1900 Smart WiFi Router Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. netgear. com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. [. . . ] Your changes are saved. Set Up Your Personal FTP Server  To set up your personal account and use FTP: 1. Get your free NETGEAR Dynamic DNS domain name. See Your Personal FTP Server on page 84. Make sure that your Internet connection is working. Your router must use a direct Internet connection. It cannot connect to a different router to access the Internet. Connect a USB hard disk drive to a USB port on the router. See Set Up FTP Access Through the Internet on page 82. On your WAN PC, you can FTP to your router using ftp://yourname. mynetgear. com. Access the Router’s USB Drive Through the Internet 88 8. Use the Router as a Media Server 8 This chapter contains the following sections: • • • Specify ReadyDLNA Media Server Settings Play Music from a USB Drive with iTunes Server Play Media from a USB Drive on TiVo 89 Nighthawk AC1900 Smart WiFi Router Specify ReadyDLNA Media Server Settings By default, the router acts as a ReadyDLNA media server, which lets you view movies and photos on DLNA/UPnP AV-compliant media players, such as Xbox360, Playstation, and NETGEAR media players.  To specify media server settings: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. Type http://www. routerlogin. net or http://www. routerlogin. com. Enter the router user name and password. The user name and password are case-sensitive. Select ADVANCED > USB Functions > ReadySHARE Storage. The USB Storage (Advanced Settings) screen displays. The Media Server (Settings) screen displays. Specify the settings: • Enable Media Server. Select this check box to enable this device to act as a media server. Select this check box if you want to play ReadyNAS media on your TiVo device. See the Play Media from a USB Drive on TiVo on page 92. Specify the name of the media server. 7. Your changes are saved. Play Music from a USB Drive with iTunes Server iTunes Server lets you play music with your Windows or Mac iTunes app from a USB drive that is connected to the router USB port. [. . . ] From the Windows toolbar, click the Start button and select Run. In the Windows Run window, type: ping -n 10 <IP address> where <IP address> is the IP address of a remote device such as your ISP DNS server. If the path is functioning correctly, messages like those shown in the previous section display. If you do not receive replies, check the following: • Check that your computer has the IP address of your router listed as the default gateway. [. . . ]