User manual NETGEAR WNDAP660

[. . . ] After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support. [. . . ] The associated identifier (AID) of the wireless station. The wireless mode in which the wireless station is operating. The wireless status of the wireless station (Associated). The received signal strength indicator (RSSI) of the wireless station. The time since the last frame was received from the wireless station. The sequence number of the last frame that was transmitted to the wireless station. The sequence number of the last frame that was received from the wireless station. The summary of the capability of the wireless station that was detected during association. The cipher that the wireless station is using and that defines the type of encryption. The signal-to-noise ratio (SNR) that indicates how much the signal of the wireless station has been corrupted by noise. The number of bytes received on the wireless station since it last started up. The number of bytes transmitted by the wireless station since it last started up. The time when these details of the wireless station were retrieved. The channel width at which the wireless station operates. Time Stamp IP Address Channel Width Management and Monitoring 82 ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 View the Activity Log You can view the wireless access point’s activity logs onscreen and save the logs. σ˜ To display the activity log and save it: 1. Click Save As to save the log contents to a file on your computer or to a disk drive. To update the display onscreen, click Refresh; to clear the log content, click Clear. The following table explains the fields of the Statistics screen: Table 21. Statistics fields Setting Wired Ethernet Packets The number of packets received and transmitted over the Ethernet connection since the wireless access point was restarted. The number of bytes received and transmitted over the Ethernet connection since the wireless access point was restarted. 11na Note: The section heading depends on the configured wireless mode. [. . . ] Antenna types not included in this user's manual, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Conformement a la reglementation d'Industrie Canada, le present emetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inferieur) approuve pourl'emetteur par Industrie Canada. Le present emetteur radio (IC: 4054A-12200202 / Model: WNDAP620) a ete approuve par Industrie Canada pour fonctionner avec les types d'antenne enumeres ci-dessous et ayant un gain admissible maximal et l'impedance requise pour chaque type d'antenne. 1Q VLAN 9, 105 Arbitration Inter-Frame Spacing (AIFS) interval 112 associated identifier (AID) 82 association flood and table overflow 90 associations, wireless clients 85 attacks detecting and preventing 90 monitoring 96 authentication network 45 RADIUS servers 57–58 authentication flood and failure attack 90 autosensing over Ethernet 10 A access, restricting by MAC address 43, 60 accounting, RADIUS servers 57–59 accounts, users 75 Active LED behavior 21 described 12 troubleshooting 134 ActiveX 136 activity log 83 ad hoc networks detecting 93 monitoring 97 admin password changing or restoring 74 default 143 AES (Advanced Encryption Standard) 44, 56–57 Aggregated MAC Protocol Data Unit (A-MPDU) frames 109 aggregation length 109 aggressive detection policy 86, 95 AID (associated identifier) 82 AIFS (Arbitration Inter-Frame Spacing) interval 112 A-MPDU (Aggregated MAC Protocol Data Unit) frames 109 antennas connecting external 13 enabling internal or external 109 external orientation 18 B background traffic advanced QoS 111 WMM QoS 63 backing up 70 band steering 9, 110 basic service set (BSS) 45 basic service set identifier (BSSID) ad hoc networks 97 configuring 48–57 described 8, 43–44 monitoring 81 beacon interval 109 beacons, unknown access points 88 best effort traffic advanced QoS 111 WMM QoS 63 bits per second, QoS policies 117–118 bridging modes, wireless 119 broadcast packets, transmitted and received 85 broadcasting wireless network names (SSIDs) 802. [. . . ]