User manual NETGEAR WNDR3700V1

[. . . ] RangeMaxTM Dual Band Wireless-N Gigabit Router WNDR3700 User Manual NETGEAR, Inc. Plumeria Drive San Jose, CA 95134 USA 202-10434-01 October 2009 v1. 3 © 2009 by NETGEAR, Inc. All rights reserved. Product Registration, Support, and Documentation Register your product at http://www. NETGEAR. com/register. Registration is required before you can use our telephone support service. [. . . ] Reserved IP addresses should be assigned to computers or servers that require permanent IP settings. Click Add. Customizing Your Network Settings v1. 3, October 2009 5-4 RangeMaxTM Dual Band Wireless-N Gigabit Router WNDR3700 User Manual 2. In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP address from the router's LAN subnet, such as 192. 168. 1. x. ) 3. Type the MAC address of the computer or server. Tip: If the computer is already present on your network, you can copy its MAC address from the Attached Devices screen and paste it here. Click Apply to enter the reserved address into the table. Note: The reserved address is not assigned until the next time the computer contacts the router's DHCP server. Reboot the computer or access its IP configuration and force a DHCP release and renew. To edit or delete a reserved address entry: 1. Select the radio button next to the reserved address you want to edit or delete. Click Edit or Delete. Using a Dynamic DNS Service If your Internet Service Provider (ISP) gave you a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a dynamically assigned IP address, you do not know in advance what your IP address will be, and the address can change frequently. In this case, you can use a commercial Dynamic DNS service, which allows you to register your domain to their IP address, and forwards traffic directed at your domain to your frequently changing IP address. Note: If your ISP assigns a private WAN IP address (such as 192. 168. x. x or 10. x. x. x), the Dynamic DNS service will not work because private addresses are not routed on the Internet. Your router contains a client that can connect to the Dynamic DNS service provided by DynDNS. org. You must first visit their website at www. dyndns. org and obtain an account and host name, which you configure in the router. Then, whenever your ISP-assigned IP address changes, Customizing Your Network Settings v1. 3, October 2009 5-5 RangeMaxTM Dual Band Wireless-N Gigabit Router WNDR3700 User Manual your router automatically contacts the Dynamic DNS service provider, logs in to your account, and registers your new IP address. If your host name is hostname, for example, you can reach your router at hostname. dyndns. org. From the main menu, under Advanced, select Dynamic DNS to display the Dynamic DNS screen. Figure 5-2 To configure Dynamic DNS: 1. Register for an account with one of the Dynamic DNS service providers whose names appear in the Service Provider list. For example, for DynDNS. org, select www. dyndns. org. [. . . ] Use the Reset button on the bottom of the router. Use this method for cases when the administration password or IP address is not known. To restore the factory default configuration settings when you do not know the administration password or IP address, you must use the restore settings button on the bottom of the router. Press and hold the restore settings button for over 5 seconds until the Power light turns to blinking amber. Release the restore settings button, and wait for the router to reboot. [. . . ]