User manual NETGEAR XAVB1401

[. . . ] Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Package Contents USB to Audio cable XAU2511 Powerline Adapter Ethernet cables (2) XAV1601 Powerline Adapter Products sold in some locations have a  Resource CD. Note: NETGEAR recommends that you do not plug a Powerline adapter directly into a power strip. [. . . ] Select the WiFi router/gateway network SSID on your smart phone or tablet. Select music on your smart phone or tablet and beam it to the speaker by way of the Airplay feature. 12 Note: Make sure that the smart phone or tablet is connected to the WiFi network of the Router/Gateway that is connected to the XAV1601 Powerline adapter. for iOS devices (such as an iPhone , iPad , or iPod): 1. Launch the music application (for example, iPod). Click the arrow on the right side of the screen. You should hear the XAU2511 play music on the remote speaker. For Android devices (such as a smart phone or tablet): You can also play music on the NETGEAR Powerline Music Extender through specific Airplay-compatible applications running on an Android OS. Once the music plays, press the Beam button and select XAU2511. Music plays on your remote speaker through the XAU2511. Use the USB to Audio Cable Depending on the speaker you want to use, you can connect a USB speaker directly into the XAU2511 or use the USB to Audio cable. Use the two RCA connectors to connect a Hi-Fi audio system with RCA aux-in connectors. Install the NETGEAR USB Media Extender utility that is available on the CD-ROM. After 30 seconds, it finds and displays the remote XAU2511 devices on your home network. Select the XAU2511 device to which you want to stream the music by selecting the line below the corresponding XAU2511XX device. You can identify the device by its AirMusic name, which is shown on the product label on the back of the XAU2511 adapter. The music played on the computer is played on the remote audio system. To stop playing the music on the XAU2511 device, select the Disconnect button as shown in the figure. After the First Installation The NETGEAR USB Media Extender utility is always running in the background. To display the utility on the screen, click the icon on the Windows tray. To play music remotely, select the XAU2511-XX and connect to it. 16 Troubleshooting • • It takes between 30 seconds to 1 minute to detect the remote XAU2511 the first time. [. . . ] When this button is in the Off position, the pass-through socket still has power. Factory Reset: Use the Factory Reset button to return your Powerline adapter to its default factory settings. Press the Factory Reset button for 2 seconds with the device plugged into the electrical socket, and then release it. • 25 Technical Support Thank you for selecting NETGEAR products. [. . . ]