User manual NEW POL XR2001NF

[. . . ] Otherwise, the picture may not display or a connection error may occur. y PC/DVI AUDIO IN input is not supported. y For an HDMI to DVI cable connection, you must use the HDMI IN 1(DVI) jack. y For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 1 jack on the TV. [. . . ] Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV is plugged in. See "Connections" for instructions. To begin Plug and Play, press the POWER button on your remote. Plug & Play Set the Clock Mode. Clock Mode : Auto 5. Set the Clock Mode Press ENTERE and select Auto or Manual, and then press ENTERE again. If you selected Auto: The TV will automatically download the correct time from a digital channel. The DST (Daylight Savings Time) screen will appear. Select On if you want to turn the DST adjustment on and off manually. Select Off to turn off the DST adjustment. Select Auto if you want the TV to adjust to DST automatically. Use the/ button to select your Time Zone, and then press ENTERE. If you selected Manual: The Clock Set screen appears. Changing the Input Source Source List When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable box or STB satellite receiver, you need to change the Source. Use the / buttons to select an external input source. TV / AV / Component / HDMI1/DVI / HDMI2 U Move EEnter mSkip If you have connected a cable or If you choose Auto, and then press ENTERE, the TV will automatically satellite box to an HDMI, Component, select the correct Antenna source. Go to "Select the Cable Type" Composite, or Antenna input, and you will use the box to select channels, press the Menu (m) button on your remote to skip this step. Select the Cable Type On the Cable Type screen, use the /// buttons to select the type Auto Program of digital and analog cable systems you have: STD, HRC, or IRC. When done, select Start, and then press ENTERE. The TV will start memorizing channels. Analog Digital STD STD HRC HRC START IRC IRC You can only choose external devices that are connected to the TV. In the Source List, connected inputs are highlighted. How to Use Edit Name Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when the Source List is displayed The following selections appear under Edit Name: VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Select the name of the device connected to specific input jacks to make your input source selection easier. Channel memorization can take up to 45 minutes, depending on your cable system. Memorized channels are added to the Added Channel list. These are EEnter RReturn If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI 1 in Edit Name. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI 1 in Edit Name. [. . . ] 85 Challenger Road Ridgefield Park, NJ 07660-2112 Address Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada Remote control sensor Customer Care Center Web Site 1-800-NEW POL (726-7864) www. samsung. com Power on Adjusting the volume Selecting a channel Using the Function menu Selecting Media Play Turn the TV on by pressing the Controller when the TV is in standby mode. Adjust the volume by moving the Controller from side to side when the power is on. Select a channel by moving the Controller backwards and forwards when the power is on. To view and use the Function menu, press and release the Controller when the power is on. [. . . ]