User manual NEWPOL XF81408DG

[. . . ] 37 2 IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS Keep these instructions in a safe place and pass them on to any future user. Read these instructions carefully before installing or using the Ventilation System. Use the appliance only for its intended purpose. , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: ~ a) Use this appliance only in the manner intended by the manufacturer. appliance, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. [. . . ] ^ To activate the automatic switch back press the "+" button. The power level indicators "1" and "4" light. ^ To deactivate the automatic switch back press the "­" button. ^ To save the setting press the On/Off button. 11 Cleaning and care , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "Important Safety Instructions". Avoid: ­ cleaning agents containing soda, acids or chlorides, ­ abrasive cleaning agents e. g. powder or cream cleansers, ­ abrasive sponges, e. g. ^ After cleaning, the filter can be placed on a towel to air dry. ^ While the filter is removed, clean any dirt or grease from the filter casing to prevent the risk of fire. , A dirty filter is a fire hazard. ^ To remove hold and pull out the deflector and the grease filter together. ^ Pull the grease filter downwards and out. Support the grease filter so that it does not fall onto the cooktop. 13 Cleaning and care Inserting / replacing the active charcoal filters For recirculation mode an active charcoal filter must be used in addition to the grease filter. The charcoal filter is designed to absorb cooking odors. The active charcoal filter is inserted above the grease filter. ^ To insert the grease filter, make sure that the red plastic guides are at the front and facing up. Please recycle. Disposal of an old appliance Old appliances may contain materials that can be recycled. Please contact your local recycling center about the possibility of recycling these materials. Before discarding an old appliance, disconnect it from the electrical supply and cut off the power cord to prevent it from becoming a hazard. Ensure that any plastic wrappings, bags, etc. , are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! , DANGER 19 Appliance dimensions 20 Appliance dimensions * The hood can also be installed in a 23 5/8" (60 cm) cabinet. 21 Appliance dimensions * The hood can also be installed in a 23 5/8" (60 cm) cabinet. 22 Appliance dimensions 1) Air extraction mode; consider accessories when measuring cabinet height and cut-outs (e. g. 2) Recirculation mode with Installation kit DUU 151 Distance between cooktop and hood (S) Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele Cooktops Electric Cooktops Electric Barbeques and Fryers Multiburner Gas cooktops < 43, 000 BTU (12. 6 KW) and no burner > 15, 000 BTU (4. 5 KW) Single burner (Wok) < 20, 500 BTU (6 KW) All other gas cooktops Non-Miele Cooktops 24" (610 mm) 26" (660 mm) 26" (660 mm) 26" (660 mm) 30" (760 mm) 30" (760 mm) 30" (760 mm) ­ If several gas surfaces are installed under the hood, the total output must be considered when determining the minimum safety distance. ­ If installing the exhaust hood in an overhead cabinet or if using a front panel made of wood or plastic, observe the instructions of the manufacturer of the gas cooktop regarding the use of flammable materials above the cooktop. If not otherwise specified in the instructions, ensure a distance of at least 30" (762 mm) from the gas cooktop. ­ If local building codes require a greater safety distance, follow their requirement. ­ If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance. See "Important Safety Instructions" for further information. 23 Installation Installation accessories 24 Installation a 2 runners (1 x right, 1x left) to support the hood in the cabinet. b 1 spacer strip to conceal the gap between the rear of the appliance and the wall. [. . . ] To achieve the most efficient air extraction and quietest noise levels, consider the following: ­ The diameter of the ductwork should not be less than 6" (150 mm). ­ If flat ducting is used, the cross section must not be smaller than the cross section of the ventilation exhaust. ­ The ducting should be as short and straight as possible. ­ The exhaust duct must not be bent or compressed. [. . . ]