User manual NEXTEL IDEN I55SR

[. . . ] Hold the folded iBoard in your hand and pull the button down to open the case. 2. Unfold the iBoard and set it on a firm, flat surface. 3 3 Grasp the red end-grips and slide them inward to bring the iBoard sections completely together. Turn on Phone 1. Before attaching your phone to the iBoard, turn the phone on. If your phone is protected by a SIM PIN, enter your SIM PIN. Note: For more information on turning on your phone and entering your SIM PIN, refer to your phone's user's guide. Set Up Dock and Connector 1. [. . . ] If you have a charger connected to the iBoard, detach it from the iBoard. Push the iBoard's phone connector down until it clicks into place. 2. Fold the dock support flat and slide it into the iBoard. With the iBoard on a flat surface, grasp the red end- grips and slide the iBoard sections apart to the ends of the case. Make sure to slide the iBoard sections as wide apart as possible. 15 2. Lift the iBoard and push up from under the center to form a "W" and then close. 3. Press the four corners of the case together until they click into place. 16 Frequently Asked Questions What should I do when I type on the iBoard and nothing happens? Check to make sure you have entered your SIM PIN correctly before connecting the phone to the iBoard. Check to make sure that your phone is properly connected to the iBoard. Check to make sure that your phone's baud rate is set to 9600 or Auto. If you are using pass-through charging, check to make sure your charger is properly connected to the charger connector and an electrical outlet. How does Release 1 of the iBoard software differ from later releases?Release 1 does not provides access to an extended character set, as well as other enhanced features described elsewhere in this frequently asked questions list. If I have Release 1 of the iBoard software in my phone, how can I upgrade to a later release?To download the latest release of the iBoard software, contact your phone service provider. 17 How do I find out what release of the iBoard software is in my phone?To view the software version on your phone: 1. If the phone's Ready or idle screen is not displayed, press the phone's end key e to display it. Press the following keys on the phone, in this order: # * m P (right side of four-way navigation key) This causes the Trace Mode screen to appear on the phone's display screen. If the Dialing Menu screen appears instead of the Trace Mode screen, return to the Ready or idle screen and press the keys more quickly. At the Trace Mode screen, Unit Info is highlighted. At the Unit Info screen, use the phone's four-way navigation key R to scroll to Software. Look at the number displayed after Software Ver:. [. . . ] Algonquin Road Schaumburg, IL 80196 Attn: Warranty Dept. The Customer will not be invoiced for the replacement item if original, identical items are shipped to the Warranty Department within 45 days. Patent, Copyright, and Trademark Information This product is covered by US Patent #6174097, EP Patent #968464 and GB Patent #2323331. MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. [. . . ]