User manual NIKON FH-G1

[. . . ] Gently slip the prepared slide, with the Thank you for your purchase of an FH-G1 cover uppermost, into the slide insertion slot MEDICAL SLIDE HOLDER. Adjust the position of the prepared slide until the portion you wish to scan is within COOLSCAN 4000 ED (4000 ED) and the scan area ( 5 in Figure A, indicated by the COOLSCAN IV ED, LS-2000, COOLSCAN III scanning guide marks 4 ). [. . . ] After reading, store this det ­ andernfalls kann der Scanner keine on with media inserted in the adapter will adapter arbeiten werden. Manual where it will be read by all who use the Initialisierung durchführen. If the product is dropped or subject to other forms of physical shock, the product or prepared slide could break, resulting in injury. Prepared slides of a thickness greater than the limit imposed by slide insertion guides at the holder entrance can not be used. Attempting to force a prepared slide of greater thickness into the holder could cause the holder or slide to break, resulting in injury. The product may suffer damage if dropped, twisted, or struck against hard objects. This product contains reinforced plastic, and may suffer deformation when subject to extreme heat. Do not store the product in direct sunlight, in the vicinity of heat-producing equipment, in a closed car on a hot day, or in any other location subject to high temperatures. Do not use the product with scanners other than those listed above, as this could cause malfunction or result in damage to the scanner or the product. Once inserted in the scanner's film slot, slides glass (for microscope) can be scanned in the same way you would scan a mounted film positive. [. . . ] Bei der Maintenance Verwendung mit anderen Scannern können Should the product become dirty, clean it gently der Adapter und der Scanner beschädigt with a soft cloth. Do not expose the product to volatile chemicals such as alcohol, thinner, or benzine, as this Anwendung des FH-G1 could cause discoloration or other deteriora- Präparate tion. [. . . ]