User manual NIKON IA-20 APS FILM ADAPTER(SUPPORTS LS-2000, LS-30, LS-40, LS-4000, LS-50, LS-5000)

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. 2 Nikon IX240 Film Adapter IA-20 Reference Manual · · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user's authority to operate the equipment. Notice for customers in Canada CAUTION This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. [. . . ] 11 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6. 4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Nikon IX240 Film Adapter IA-20 Reference Manual 1. Overview Thank you for your purchase of an IA-20 IX240 film adapter. With the IA-20 inserted in the adapter slot of your LS-2000 Nikon film scanner, an entire roll of IX240 film can be previewed and selected frames scanned either singly or all at once. Like the other adapters for the LS-2000, the IA-20 can be inserted while the scanner is on and connected to a computer. This manual describes the procedures for unpacking, setting up, and connecting the adapter to your scanner. The next chapter, "Parts and Accessories, " details the contents of the package and the parts of the adapter. This is followed by "Installation, " which describes how to connect the adapter to the scanner. In "Using the IA-20, " the procedures for using IX240 film are explained. The final chapter, "Maintenance, " gives instructions on how to care for and transport the adapter. Please read all instructions thoroughly to ensure that you can get the most from your IA-20. The procedures for scanning images with the IX240 film adapter may be found in the software reference manuals provided on the CD-ROM that came with your scanner. We hope that you find this manual helpful. Nikon IX240 Film Adapter IA-20 Reference Manual 5 2. Parts and Accessories This chapter lists the items packaged with your adapter and identifies the parts of the IA-20. 2. 1 Package Contents Purchasers of the IA-20 should find that the package contains all the items listed below. Should you find that anything is missing or damaged, contact your retailer immediately. IA-20 IX240 film adapter (1) Reference manual (this manual) (1) 2. 2 Parts of the IA-20 Latch button Cover Film slot Film chamber 6 Nikon IX240 Film Adapter IA-20 Reference Manual 3. Installation Before installing the IA-20, make sure that your scanner is set up as described in the Fast Track Guide and reference manual provided with the scanner. The IA-20 should not be used where: · the temperature exceeds 35ºC (95ºF) or falls below 10ºC (50ºF) · · · · · · it would be subject to condensation or drastic changes in temperature the humidity exceeds 85% it would be exposed to direct or reflected sunlight it might be subject to vibration or strong physical shocks there is a lot of dust it would be exposed to radio interference from other electronic devices Warning: Failure to observe the above precautions could result in fire or in scanner malfunction. The IA-20 can be mounted on the scanner whether the scanner is off or on and connected to a computer. Before mounting the adapter while the scanner is on, check that the status LED is glowing steadily. [. . . ] Use the copy when making further scans. 4. 2 Removing film To remove film from the adapter, click the "eject" button ( ) in the Nikon Scan scan window (see the documentation provided with your scanner). Wait until the scanner's status LED glows steadily, then open the cover and take the film out with your fingers. If You Should Notice Anything Unusual Should you notice an unusual noise, smell, or smoke coming from the adapter or scanner, immediately turn off the scanner and then unplug the power cord. Continued use could result in fire or electric shock. After ensuring that the equipment is no longer smoking, contact your dealer or Nikon representative for information on replacement or repair. [. . . ]