User manual NIKON COOLPIX L110

[. . . ] DIGITAL CAMERA User's Manual En Trademark Information · Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc. · Adobe and Acrobat are registered trademarks of Adobe Systems Inc. · SD and SDHC Logos are trademarks of SD-3C, LLC. [. . . ] The most recently measured value is applied for white balance. Preset manual Cancel Measure Exit 4 Frame the reference object. Preset manual Cancel Measure Exit Reference object frame 5 Press k. The shutter is released (no image is captured) and the new white-balance value is set. B 54 Note on Preset Manual The camera cannot measure a white balance value for when the flash fires. When shooting with the flash, set White balance to Auto or Flash. Auto Mode C Continuous Set to A (auto) mode (A 48) M d (Shooting menu) M C Continuous Change settings to Continuous or BSS (best shot selector). Flash will be switched off for Continuous, BSS or Multi-shot 16, and focus, exposure and white balance are fixed at the values for the first picture in each series. U V Single (default setting) One shot is taken each time shutter-release button is pressed. Continuous While the shutter-release button is held all the way down, up to 4 pictures are taken at a rate of about 1. 0 frames per second (fps) when image mode is set to I 4000×3000. D BSS (Best Shot Selector) The "best shot selector" is recommended when shooting with the flash off or the camera zoomed in, or in other situations in which inadvertent motion can result in blurred images. When BSS is on, the camera takes up to 10 pictures while the shutter-release button is held all the way down. The sharpest image in the series is automatically selected and saved. W Multi-shot 16 Each time the shutter-release button is pressed all the way down, the camera takes 16 shots at a rate of about 7. 4 frames per second (fps), then arranges them in a single image. Images are captured with the image mode locked at L 2560×1920. · Digital zoom cannot be used. More on Shooting The icon for the current setting is displayed in the monitor during shooting (A 8). When set to Single, no icon is displayed. B Note on Continuous Shooting · The frame rate with continuous shooting may vary, depending upon the current image mode setting, the memory card used, and the shooting environment. · This feature cannot be used simultaneously with certain features. "Camera Settings that Cannot Be Set at the Same Time" (A 58) B B Note on BSS BSS is best suited to shooting subjects that are not moving. When shooting moving subjects or when the composition of the picture changes while shooting, the desired results may not be achieved. Note on Multi-shot 16 Smear (A 121) visible in the monitor when shooting with Multi-shot 16 will be visible in the saved image data. To reduce smear effects, avoid bright objects such as the sun, reflections of the sun, and electric lights when shooting. 55 Auto Mode E ISO Sensitivity Set to A (auto) mode (A 48) M d (Shooting menu) M E ISO sensitivity Sensitivity is a measure of how quickly the camera reacts to light. The higher the sensitivity, the less light needed to make an exposure. Although a high ISO rating is suited for taking pictures of subjects in action or in poor lighting, high sensitivity is often associated with "noise" - randomly spaced, brightly colored pixels concentrated in dark parts of the image. Auto (default setting) Sensitivity is ISO 80 under normal conditions; when lighting is poor and the flash is off, the camera compensates by raising sensitivity to a maximum of ISO 800. 80, 100, 200, 400, 800, 1600, 3200, 6400 Sensitivity will be locked at the specified value. · When ISO sensitivity is locked, Motion detection (A 105) does not function. More on Shooting The icon for the current setting is displayed in the monitor (A 8). When Auto is selected, the E icon is not displayed at ISO 80, but is displayed if the ISO sensitivity automatically increases to more than 80 (A 30). B B Notes on ISO Sensitivity This feature cannot be used simultaneously with certain features. "Camera Settings that Cannot Be Set at the Same Time" (A 58) ISO 3200 and ISO 6400 56 When ISO sensitivity is set to 3200 or 6400, the available Image mode settings are limited to M 2048×1536, N 1024×768, and O 640×480. The image mode of the shooting mode is shown in red and X is displayed next to the ISO sensitivity in the lower left of the monitor. 3200 Auto Mode F Color Options Set to A (auto) mode (A 48) M d (Shooting menu) M F Color options Make colors more vivid or save images in monochrome. n o p q r Standard color (default setting) Use for images exhibiting natural color. [. . . ] · The printer does not support the paper sizes used by the camera. · The printer automatically selects the paper size. · · · · · · A 20 20 83 ­ 82 ­ Images to be printed are not displayed. Cannot select paper size with camera. 18 89, 90 132 Technical Notes Specifications Nikon COOLPIX L110 Digital Camera Type Effective pixels Image sensor Lens Focal length f/-number Construction Digital zoom Vibration reduction Autofocus (AF) Focus range (from lens) Focus-area selection Monitor Frame coverage (shooting mode) Frame coverage (playback mode) Storage Media File system File formats Compact digital camera 12. 1 million 1/2. 3-in. [. . . ]