User manual NIKON SB-R200-R1C1 WIRELESS REMOTE KIT-

[. . . ] En Nikon Close-up Speedlight Commander Kit R1C1 Nikon Close-up Speedlight Remote Kit R1 Wireless Speedlight Commander SU-800 Wireless Remote Speedlight SB-R200 Instruction Manual For your safety Before using your product, please read the following safety precautions carefully and thoroughly to ensure correct and safe use and to help prevent damage to your Nikon product or injury to yourself or others. For quick reference by those who use the product, please keep these safety instructions near the product. In this manual, safety instructions are indicated with these symbols: WARNING in personal injury, or death and property damage. CAUTION Disregarding instructions marked with this symbol could result Disregarding instructions marked with this symbol could result in property damage. WARNINGS for the Wireless Speedlight Commander SU-800 and the Wireless Remote Speedlight SB-R200 1 If corrosive liquids seep from the batteries and get in your eyes, immediately wash your eyes with running water and consult with a doctor. Your eyes could be seriously damaged if they are not treated quickly. [. . . ] · The values are displayed in decimal format, like 0. 3 for 1/3, and 0. 7 for 2/3. · Continuously pressing the [ ] or [ ] button quickly increases or decreases the value. · The flash output level blinks during adjustment and stops after blinking six times unless an adjustment is made. The last value to blink is the one that has been set automatically. Details on close-up flash operation and shooting procedures 75 3 Procedures for close-up flash operation 7 Setting the manual flash output level for group C. Press the [SEL](FUNC. ) button to display manual flash output level (blinking) for group C, then press the [ ] or [ ] button to increase or decrease the value. Press the [SEL](FUNC. ) button once again and the flash output level stops blinking. The last value to blink is the one that has been set automatically. · Manual flash output level can be set separately for each group. · The flash output level can be set from M1/1 to M1/64. (M1/8 is preset when shipped from the factory. ) · Press and hold the [ ] or [ ] button to quickly increase or decrease the value. · The flash output level ratio blinks during adjustment and stops after blinking six times unless an adjustment is made. The last value to blink is the one that has been set automatically. 8 Setting a channel number on the SU-800. Set the communication channel numbers of the SU-800 and SB-R200. Press the [SEL](FUNC. ) button to display the channel number (blinking). Press the [ ] or [ ] button to set the channel number. Press the [SEL](FUNC. ) button once again and the channel number stops blinking. The last channel number to blink is the one that has been set automatically. · Select one of the four available channels. The same channel number is set for all groups. · The channel number blinks during adjustment and stops after blinking six times unless an adjustment is made. The last channel number to blink is the one that has been set automatically. CHANNEL 3 2 1 4 9 Setting a channel number on the SB-R200. Rotate the [CHANNEL] select dial on the SB-R200 to set the channel number. Be sure to set the same channel number as set on the SU-800. 76 10 GROUP C B A E L A B Setting a group on the SB-R200. Rotate the [GROUP] select dial on the SB-R200 to set the group. [. . . ] 91 Nikon Close-up Speedlight Commander Kit R1C1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Nikon Close-up Speedlight Remote Kit R1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Nikon Creative Lighting System (CLS). . . . . . . 7 Number of flashes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]