User manual NIKON WT-3A (SUPPORTS D200 )

[. . . ] En Wireless Transmitter W T-3 User's Manual Trademark Information Macintosh and Mac OS are trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other trade names mentioned in this manual or the other documentation provided with this Nikon product are trademarks or registered trademarks of their respective holders. Apple Public Source License This product includes Apple mDNS source code that is subject to the terms of the Apple Public Source License located at URL http://developer. apple. com/darwin/. [. . . ] Connect the DC plug on the AC adapter to the WT-3 DC-IN connector, not to the camera. 20 Uploading Images: Transfer Mode Choose transfer mode to upload photographs to a computer or ftp server. The principal steps are: Connect to the host or ftp server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Upload images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21­22 23­25 Before connecting to the host, create a host profile using the WT-3 Setup Utility ( 11­16) and be sure that the host is running. Settings for connection for an ftp server can also be adjusted from the camera menus ( 48­50). Connecting to the Host or ftp Server 1 2 3 4 Turn the camera off and insert the memory card containing the pictures to be sent. Front To access the network via Ethernet, connect the Ethernet cable ( 4). Note that wireless transfer is disabled while an Ethernet cable is connected. Disconnect the Ethernet cable before accessing a wireless network. Turn the camera off before connecting or disconnecting the Ethernet cable. Turn the camera on. Select Transfer mode for the Wireless transmitter > Mode option in the camera setup menu ( 34). Choose PTP Before connecting the WT-3, set the USB option in the camera setup menu to PTP ( 11). 21 5 A list of available connection profiles will be displayed. Press the multi selector up or down to highlight the desired profile and press to the right to select. Viewing Profile Information Press the camera button to view information on the selected profile. Editing ftp Server Profiles If an ftp server profile is selected, ftp settings can be edited manually by pressing the camera button. See the Menu Guide for more information ( 35). 6 Choose Settings in Wireless transmitter menu to edit the following transfer options: Option Description Auto send Upload photos as they are taken. Delete Delete photos from camera memory after send?Send NEF + JPEG images as JPEG only or Send file as as NEF and JPEG. Send folder Upload all photos in selected folder. Deselect all images selected for upload. 46 46 46 47 47 7 8 22 Select On for Wireless transmitter > Wireless LAN system ( 34). Confirm that the selected profile is displayed in green in the top level of the wireless transmitter menu. For information on what to do if an error is displayed, see "Troubleshooting" ( 51). Uploading Images 1 2 Press the button to view pictures on the memory card. Display the first picture to be sent in single-image playback or highlight it in the thumbnail list. Press the center of the multi selector while pressing the button. The image will be marked with a white "send" icon and transmission will begin immediately. During upload, images are marked with a green "sending" icon. [. . . ] WEP (Wired Equivalent Privacy): A type of encryption in which the data transmitted between devices is encoded using a shared encryption key (WEP key). Wireless LAN access point: A wireless transceiver that acts as the connection between wireless devices and a wireless network. WPA-PSK (WiFi Protected Access with Pre-Shared Key): A type of authentication for wireless networks using previously-established (pre-shared) TKIP or AES keys. Wireless devices using this form of authentication can only communicate with devices with the same pre-shared key. 54 Specifications Wireless Standards IEEE 802. 11b/g (standard wireless LAN protocol), ARIB STD-T66 (standard for low power data communications systems) Communications IEEE 802. 11g: OFDM protocols IEEE 802. 11b: DBPSK, DQPSK, CCK Operating frequency WT-3: 2412­2472 MHz (13 channels) WT-3A: 2412­2462 MHz (11 channels) Range (line of sight) Approximately 80 m (262 ft. ) with built-in antenna Approximately 280 m (919 ft. ) with WA-E1 extended range antenna and large antenna at wireless LAN access point Data rates * IEEE 802. 11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps IEEE 802. 11b: 1, 2, 5. 5, and 11 Mbps Security TKIP, AES, 128/64-bit (104/40-bit) WEP Access protocols Infrastructure / ad-hoc Ethernet Standards IEEE 802. 3u (100 base-TX)/IEEE 802. 3 (10 base-T) Data rates 10/100 Mbps with auto detect Port 100 base-TX/10 base-T (AUTO-MDIX) Data transfer protocols PTP-IP, ftp Power consumption 3. 5 W maximum Power source Rechargeable EN-EL3e Li-ion battery × 1 (supplied with D200), EH-6 AC adapter (available separately) Operating environment Temperature: 0­40 °C (32­131 °F) Humidity: less than 85% (no condensation) Weight WT-3: 295 g / 10. 4 oz (body only) WT-3A: 295 g / 10. 4 oz (body only) Dimensions (W × H × D) 152 mm × 110 mm × 72. 5 mm (6. 0 in. [. . . ]