User manual NILFISK ACTION PLUS EDITION 1

[. . . ] Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes. Use and store this machine indoors and in a dry environment, 0 °C to 60 °C. Do not handle the machine with wet hands. Turn off the machine before unplugging. [. . . ] 3 Changing the dust bag The dust bag indicator turns completely red when the dust bag needs to be changed. Release the hose connection from the suction inlet. Insert the new dust bag by guiding the cardboard into the tracks and push it down. Release the hose connection from the suction inlet. Take out the filter holder with prefilter. Put the filter holder into the track and push in place. Insert the new dust bag by guiding the cardboard into the track and push it down. Changing the HEPA filter The HEPA filter cleans the exhaust air from micro particles the dust bag can not keep. Adjust the suction power Sliding valve on the bent tube The suction power is maximal with the sliding valve closed and minimal when all open. Adjust the suction power by putting the sliding valve in the desired position. Power regulation The suction power is adjusted with the power regulator wheel in the back of the machine. One located on the underside to use when machine stands on the back, and the other on the back to use when the machine is standing on its wheels. Thermal fuse The machine is fitted with a thermal fuse, which prevents the machine from overheating. If the thermal fuse blows, the machine automatically switches off the motor and must cool before it can be started again. Turn off the machine and unplug from the wall socket. See to that nothing blocks the air flow through the bent tube, hose, tube, nozzle, dust bag or filters. Plug in the machine again and push the start button. The machine will not start until cool enough. If the machine does not start turn it off and unplug. Adjust the suction power by means of the power regulation or the sliding valve on the bent tube. The models can include different nozzles. Repair or service of electrical components such as cord or motor, must only be carried out by an authorized service center. [. . . ] Upon completion of any repairs necessary, the vacuum cleaner will be returned to the customer at the risk and expense of Nilfisk-Advance. If the machine has been used for home renovations. Nor will it cover incorrect or poor configuration, i. Setting up or connection, nor fire-damage, fire, lightning strike or unusual voltage fluctuations or any other electrical disturbances such as defective fuses or defective electrical installations on the supply grid, and defects or damage in general that Nilfisk-Advance consider to be the result of causes other than manufacturing and material defects. [. . . ]