User manual NILFISK C 110.3 X-TRA

[. . . ] Nilfisk C 100. 5 Nilfisk C 110. 3, C 110. 3 X-TRA User Manual Index 1 2 3 4 5 6 7 8 9 10 Safety precautions and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before you start using your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 After using your pressure washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1 Safety Precautions and Warnings Symbols used to mark instructions Before starting up your highpressure washer for the first time, this instruction manual must be read through carefully. Safety instructions marked with this symbol must be observed to prevent danger to persons. This symbol is used to mark safety instructions that must be observed to prevent damage to the machine and its performance. This symbol indicates tips and instructions to simplify work and to ensure a safe operation. Do not let people who have not been trained in the use of a high pressure washer nor read the instruction manual operate the machine. [. . . ] Secure the handle by mounting the 2 screws. Use the enclosed hexagon key. 3. 2 Mounting of quick coupling 1. Screw the quick coupling tight on to the water inlet (2). Note: The inlet filter (2a) must always be fitted in the water inlet pipe to filter out sand, limestone and other impurities as these will damage the pump valves. Caution: Failure to fit the filter will invalidate the guarantee. 3. 3 Mounting of high pressure hose on spray gun 1. Attach the high pressure hose (4) to the spray gun (7). Detach the high pressure hose by pressing the pawl (A). 6 4 Operating your pressure washer 4. 1 Connection of high pressure hose 1. Mount the high pressure hose on the outlet (3). 4. 2 Mounting of spray lance and Click & Clean nozzles 1. Push the spray lance (6) into the spray gun (7) and screw it on. Note: The spray lance (6) has a built-in low pressure nozzle that can be used for flushing away dirt. Warning: When attaching the Click & Clean nozzles, the pawl on the side of the spray lance (6) should come out again. Note: The foam sprayer (10) features a swivel lock, which must be positioned in the hole in the Click & Clean spray lance (6). Press the pawl to detach the Click & Clean nozzle. 7 4. 3 Water connection An ordinary 1/2" garden hose of min. NOTE: Connection to the public mains according to regulations. IMPORTANT!If there is a risk of running sands in the inlet water (i. e. from your own well), an additional filter (106411231) should be mounted. Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the machine. Note: Check that the filter is fitted in the water inlet pipe and that it is not clogged up. Connect the water hose to the water supply by means of the quick connector (inlet water, max. Turn on the water. 4. 4 Start and stop of the machine The spray lance is affected by a thrust during operation - therefore always hold it firmly with both hands. IMPORTANT: Point the nozzle at the ground. Check that the machine is in uprigth position. [. . . ] Stop the machine and disconnect the nozzle. IMPORTANT: The cleaning tool (11) should only be used when the nozzle is detached!Unplug the cleaner and cut the electric cable. Do not discard electrical appliances with household waste. [. . . ]