User manual NILFISK UNO BOOSTER BASIC

[. . . ] UNO BOOSTER BASIC DUO BOOSTER BASIC Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 25 Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 48 Manuel d'Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 71 Gebruikershandleiding . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To be used for dosing of low-foaming detergents or disinfectants. Dosage 1-8%. Outlet point with detachable foam injector To be attached to the quick coupling of the high pressure cock. To be used in conjunction with foam lance for application of high-foaming detergents or disinfectants. Outlet point with cleaning trolley and foam injector To be attached to the quick coupling of the high pressure cock. To be used in the same way as "Outlet point with detachable foam injector". Makes it possible to place 4 spray lances, 2 pcs. of 25 l containers as well as 20 m high pressure hose. 14 4. 1. 6 Application of detergents (internal) 2 This kind of detergent addition is an option. Insert the suction hose (1) from the machine in the container. On the regulating knob (2) the dosage can be set from 1-4%. If the machine is mounted on a pipeline, detergent will come out of all outlet points. The pH value MUST be between 5. 5 and 8. 5. A 1 4. 2 Starting up 5 3 2 The shut-off cock on the water inlet should be open. Turn the main switch (2) to position - 1 -. Check on the pressure gauge (5) that a pressure is being built up in the system. If a pressure is not being built up, vent the machine as described in section 3. 7 Venting. 01 0 1 DUO BOOSTER: Position 1 = Pump no. 2 in operation Positions 1+2 = Pumps no. 1 and 2 in operation 1 0 2 1+2 1. Turn the main switch (2) to position 1, 2 or 1+2. Check on the pressure gauge (5) that a pressure is being built up in the system. If a pressure is not being built up, vent the machine as described in section 3. 7 Venting. 15 4. 3 Operation automatic start/stop Always hold the spray lance with both hands!The machine is automatically activated when the trigger (1) of the spray handle is activated. When the trigger is released, the machine automatically stops after 20 seconds. When the machine is not in use, the trigger should be locked with locking device (see arrow). 1 4. 4 Double spray lance, pressure regulation The spray lance features 2 nozzles, a high pressure nozzle and a low pressure nozzle. 1 High pressure mode When the pressure reducing valve (1) is completely closed (turned clockwise - B), only the high pressure nozzle is used high pressure mode. [. . . ] Machine starts and stops Machine starts > Leaky hose/ pipeline/spray handle > Oil shortage in pump · Refill with oil. Should other malfunctions occur than those mentioned above, please contact your nearest NilfiskALTO service organisation. 24 8 Technical Data Model Pump pressure 1) Water volume, min. /max. pressure Water tank, volume Water connection: Max. temperature, inlet water Spray lance: Nozzle type, h. p. /l. p. length bar l/min liter UNO BOOSTER 160 19. 1/17. 3 3 DUO BOOSTER 160 19. 1-38. 3/17. 3-34. 6 7. 5 bar bar °C 10 1, 0 70 (80, see section 3. 4) 10 1, 5 70 (80, see section 3. 4) N/kp 0640 47/4, 8 0640 47/4, 8 Ø15 x 1, 5 - max. [. . . ]