User manual NINTENDO GAMEBOY ADVANCE

[. . . ] If battery leakage occurs, avoid contact with skin. If contact occurs, immediately wash thoroughly with soap and water. If liquid leaking from a battery pack comes into contact with your eyes, immediately flush thoroughly with water and seek medical attention. To avoid battery leakage: · Do not expose battery to excessive physical shock or vibration. [. . . ] After 500 recharges, battery life may become only 70% of the battery life when new. It takes approximately three hours to recharge the battery. (The actual recharge time varies depending on how much battery life you have left. ) When the Power Indicator LED becomes red, save your game and recharge the battery to prevent game data loss. You can play games while recharging the battery, but the recharge time is longer when you do so. IMPORTANT: The Game Boy Advance SP AC Adapter is only for use with the Game Boy Advance SP portable video game system. It is not compatible with the original Game Boy, Game Boy pocket, Game Boy Color or original Game Boy Advance. When you are finished playing, always turn your system OFF, and unplug the AC Adapter (if you are using it) from both the wall socket and Game Boy Advance SP. Do not wrap the AC Adapter cord around the Game Boy Advance SP. Illustration 1 3. When fully charged, remove the Illustration 3 AC Adapter from the wall outlet and fold the prongs back into the housing. Remove the DC Connector Plug from External Extension Connector 2. When disconnecting any plugs from the Game Boy Advance SP or wall outlet, carefully pull by the plug itself rather than by the cord. 5 Using the Game Boy Advance SP Video Game System · For best color under bright light conditions, turn the screen light OFF (longer battery life). See your local Nintendo retailer, visit our online store at www. nintendo. com or call 1-800-255-3700. ) This cable set includes a cable to connect your Game Boy Advance SP to any other Game Boy Advance, Game Boy Color, Game Boy pocket or Game Boy Printer (no longer available), plus an adapter to allow connection to the original Game Boy. Make sure that the power is OFF on all systems. Plug the Game Link cable into the External Extension Connector 1 (EXT) on the top of the Game Boy Advance SP. Plug the other end of the cable into the connector on another Game Boy system or printer and turn the power switches to ON. See the Game Pak instruction booklet for additional information. NOTE: Because of differences between the Game Boy Advance and other Game Boy systems, a few two-player games may not work properly. This cable setup is only for original Game Boy and Game Boy Color Game Paks. Do not use with Game Boy Advance Game Paks. Use of this cable with Game Boy Advance Game Paks may cause loss of game information during game play or when saving data. Please see Section 9 for Multi-player games using Game Boy Advance Game Paks. Be sure to remove this cable when not playing two-player games. Illustration 8 Connecting the Game Boy Advance SP to another Game Boy Advance SP, Game Boy Advance, Game Boy Color, Game Boy pocket or Game Boy Printer. Illustration 9 Connecting the Game Boy Advance SP to the original Game Boy. [. . . ] Some Adult Assistance May Be Needed - Applies only to games rated Early Childhood. Strong Language - Profanity and explicit references to sexuality, violence, alcohol or drug use. Strong Lyrics - Profanity and explicit references to sexuality, violence, alcohol or drug use in music. 13 Warranty and Service Information Rev. N You may need only simple instructions to correct a problem with your product. [. . . ]