User manual NINTENDO WII BALANCE BOARD

[. . . ] The Official Seal is your assurance that this product is licensed or manufactured by Nintendo. Always look for this seal when buying video game systems, accessories, games and related products. Health and Safety Information Components Installing Batteries Placement of the Wii Balance Board Synchronizing the Wii Balance Board with your Wii Console Basic Operations Wii Balance Board Foot Extensions Troubleshooting Warranty and Service Information 2 3 4-5 6 7-8 9 10 11 12 Nintendo does not license the sale or use of products without the Official Nintendo Seal. Please carefully and completely read the WiiTM Operations Manual - System Setup before using this accessory. [. . . ] The Power Button faces away from the TV. IMPORTANT: To operate correctly, the Wii Balance Board must be synchronized with the Wii console using Standard Mode Synchronization. Follow the steps below to synchronize the board to the console. â· This procedure must be followed for each Wii Balance Board compatible Game Disc. â· These synchronization settings will be saved even if the console is turned off. â· This procedure can be completed only if a compatible Game Disc is running in the console. Press the EJECT Button on the front of the Wii console and remove any game disc if necessary. Open the SD Card slot cover on the front of the Wii console. NOTE: Close the SD Card slot cover when you are finished with the synchronization procedure. Make sure you have adequate space between you and any other objects or people during gameplay. Nintendo recommends at least 3 feet (1 meter). The balance sensors must contact the floor directly for proper operation. If carpet or other material contacts the bottom of the board, use the included foot extensions. see page 10 for installation instructions. IMPORTANT: The Wii Balance Board will not work until it has been synchronized with your Wii console. NOTE: Replace the Battery Cover when you are finished with the synchronization procedure. The Power LED on the board will start blinking (for up to about 20 seconds). Most of the basic activities involving the Wii Balance Board are done using the positions shown below. There may be other ways of gameplay depending on the type of game you are playing. Review the instruction booklet for the game you are playing for further information. [. . . ] Repeat the steps in this Operations Manual for setting up the board. Turn the Wii Balance Board over and remove any dust or dirt from the Balance Sensors. Carefully push the foot extensions straight onto the sensors. Make sure they are pushed on all the way to assure that the board will lay flat and stable. [. . . ]