User manual NISSAN FRONTIER 2008

[. . . ] FOREWORD Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. [. . . ] For example, if you were directed to dial an extension by an automated system: Say: "Send one two three four. " "Call" Main Menu "Call" Name (speak name) A Number (speak digits) B "Redial" C "Call Back" D Name (speak name) A If you have stored entries in the Phone Book, you can dial a number associated with a name and location. See "Phone book" later in this section to learn how to store entries. 4-34 Heater, air conditioner, audio and phone systems The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR session and returns to the call. "Transfer call" -- Use the Transfer Call command to transfer the call from the Bluetooth Hands-Free Phone System to the cellular phone when privacy is desired. The system announces, "Transfer call. Call transferred to privacy mode. " The system then ends the VR session. You can also issue the Transfer Call command again to return to a hands-free call through the vehicle. "Mute" -- Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice. NOTE: If a call is ended or the cellular phone network connection is lost while the Mute feature is on, the Mute feature will be reset to "off" for the next call so the other party can hear your voice. "Phone book" NOTE: Phone book commands are not available when the vehicle is moving. Main Menu "Phone Book" "New Entry" A "Edit" B "Delete" C List Names" D When prompted by the system, say the name you would like to give the new entry. For example, say: "Mary. " If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name already stored, the system tells you, then prompts you for a name again. Once the system accepts the name and you confirm it is correct, the system asks for a location (Home, Office, Mobile or Other). For example, say: "Home. " The system acknowledges the location. The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone's memory. Enter a phone number by voice command: For example, say: "five five five one two one two. " See "How to say numbers" earlier in this section for more information. To transfer a phone number stored in the cellular phone's memory: Say Transfer entry. The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone The Phone Book stores up to 40 names for each phone paired with the system. Each name can have up to 4 locations/phone numbers associated with it. NOTE: Each phone has its own separate phone book. You cannot access Phone A's phone book if you are currently connected with Phone B. "New entry" A Use the New Entry command to store a new name in the system. Heater, air conditioner, audio and phone systems 4-35 number will be transferred from the cellular phone via the Bluetooth communication link. The transfer procedure varies according to each cellular phone. [. . . ] . 1-66, 2-17 Anti-lock brake warning light . . 2-14 Engine oil pressure warning light . . 2-16 Passenger air bag and status light. . 1-66 Warning/indicator lights and audible reminders . [. . . ]