User manual NISSAN PATHFINDER NAVIGATION SYSTEM-2004

[. . . ] FOREWORD Thank you for purchasing a NISSAN automobile. This user's manual is for the navigation system only. Please read this manual carefully to ensure safe operation of the navigation system. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN vehicle Please read your vehicle's owner's manual first. [. . . ] The new destination (waypoints) will be set. 5-38 How do I program a destination? INV1872 INV1873 INV1874 TO DELETE A DESTINATION 1. To delete the destination (waypoint), choose the destination (waypoint) in step 3 and select the Delete key. 2. The preset destination (waypoints) will be deleted. 3. INFO: button to return to the To set a new destination (waypoints), refer to "Expert mode categories" or "Easy mode categories" on page 5-2. If you reset the new destination (waypoints), the older destination (waypoints) will be deleted. If you have requested a route calculation, the previous suggested route will be deleted from memory. How do I program a destination?5-39 ALL CLEAR INV1868 INV1875 INV1876 The destination and waypoint can be deleted at one time. Several keys will be displayed on the right of the screen. The [EDIT ROUTE] screen will be displayed. Select the Yes key. 5-40 How do I program a destination? QUICK STOP INV1314 INV1878 INV1879 The system will display pre-defined POI's (Points of Interest) in the current vicinity of the vehicle and the distances to them. These POI's can be gas stations, hotels, restaurants, ATM's or customer-programmed facilities. This function will operate while the vehicle is moving. The display shows several keys on the right of the screen. The display shows the [QUICK STOP] screen. INFO: Five categories are displayed on the screen. When you use a POI category frequently, it is convenient to use the quick stop function. Please refer to "Quick stop customer setting" on page 5-42. 3. The cuisine selection screen is displayed only when the RESTAURANT key is selected. Select the All key or Fast Food key. How do I program a destination?5-41 INV1880 INV1881 INV1781 4. The display shows the direction and distance from the current vehicle position to the selected facility. Select the facility name you want to set as a destination (waypoints). 5. [. . . ] This condition is not abnormal. The starting point to the destination is too close. The present location is about 1, 100 miles (1, 770 km) away from the destination. The route is not displayed continuously at waypoints, for example, that are not calculated route from the vehicle's current position. The suggested route the vehicle has traveled is erased. [. . . ]