User manual NISSAN PATHFINDER-2003

[. . . ] Foreword Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. [. . . ] When removing the key from the ignition, make sure the selector lever is in the P (Park) position. If the selector lever is not returned to P (Park), the key cannot be moved toward LOCK. When the key cannot be turned toward the LOCK position, proceed as follows to remove the key: Starting and driving 5-7 1) Move the selector lever into the P (Park) position. 2) Turn the ignition key slightly in the ON direction. 3) Turn the key toward the LOCK position. If the key is removed from the ignition switch, the selector lever cannot be moved from P (Park). The selector lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. There is an OFF position in between LOCK and ACC, although it does not show on the lock cylinder. When the ignition is in OFF the steering wheel is not locked. In order for the steering wheel to be locked, it must be turned about 1/6 of a turn clockwise from the straight up position. To lock the steering wheel, turn the key to the LOCK position. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. WARNING Never remove or turn the key to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. SSD0082C MANUAL TRANSMISSION The switch includes an anti-theft steering lock device. The ignition key can only be removed when the switch is in the LOCK position. On manual transmission models, to turn the ignition key to LOCK from ACC or ON, first turn the key to OFF and turn the key to LOCK while pushing the key in. In order for the steering wheel to be locked, it must be turned about 1/6 of a turn clockwise from the straight up position. To lock the steering wheel, turn the key to 5-8 Starting and driving the LOCK position. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. This position turns on the ignition system and the electrical accessories. START (4) This position activates the starter motor, starting the engine. Immobilizer System key. If the no start condition re-occurs, NISSAN recommends placing the registered Nissan Vehicle Immobilizer System key on a separate key ring to avoid interference from other devices. WARNING Never remove or turn the key to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. NISSAN VEHICLE IMMOBILIZER SYSTEM The Nissan Vehicle Immobilizer System will not allow the engine to start without the use of the registered Nissan Vehicle Immobilizer System key. If the engine fails to start using the registered Nissan Vehicle Immobilizer System key (for example, when interference is caused by another Nissan Vehicle Immobilizer System key, an automated toll road device or automated payment device on the key ring), restart the engine using the following procedures: 1. [. . . ] 2-19 Windshield wiper and washer switch . . . . . . . . . . . 2-19 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Waxing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Weights (See dimensions and weights) . . . . . . . . . . . . . [. . . ]