User manual NISSAN VERSA-2007

[. . . ] FOREWORD Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure. [. . . ] For information on speaker adaptation, see "Speaker adaptation (SA) mode" later in this section. Heater, air conditioner, audio and phone systems 4-31 4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in French). Use the following chart to select the language. NOTE: Note: You must press the button or the button within 5 seconds to change the language. Current language English Spanish French Press (PHONE/SEND) to select Spanish English English Press (PHONE/END) to select French French Spanish 5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed. 3. The system acknowledges the command and announces the next set of available commands. The system acknowledges the command and asks you to initiate pairing from the phone handset D . The pairing procedure of the cellular phone varies according to each cellular phone manufacturer. See the cellular phone Owner's Manual for details. You can also visit www. nissan-usa. com/bluetooth for instructions on pairing NISSAN recommended cellular phones. When prompted for a PIN code, enter "1234" from the handset. The PIN code "1234" has been assigned by NISSAN and cannot be changed. The system asks you to say a name for the phone E . If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if more than one phone is paired and the name sounds too much like a name already used, the system tells you, then prompts you for a name again. Pairing procedure NOTE: The pairing procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. Main Menu "Setup" A "Pair Phone" B "New Phone" C Initiate from handset D Name phone E Assign priority F Choose ringtone G 1. The system announces the available commands. The system acknowledges the command and announces the next set of available commands. 4-32 Heater, air conditioner, audio and phone systems 6. The system asks you to assign a priority level F . The priority level determines which phone is active when more than one paired Bluetooth phone is in the vehicle. Follow the instructions provided by the system or refer to "Setup" later in this section for more information on changing priorities. [. . . ] . 5-16 Driving with manual transmission . . 5-15, 5-18 Travel (See registering your vehicle in another country) . Vehicle identification number (VIN) (Chassis number). Vehicle identification number (VIN) plate . [. . . ]