User manual NITECORE MH1C

[. . . ] ® ALL-ROUND Flashlight Expert User Manual 2. Under normal charging conditions, the red indicator light near the charging port will blink twice every second. If a problem is detected during the charging process, the MH1C will stop charging and the red indicator will blink rapidly. [. . . ] CR123 batteries. Brightness & Runtime TURBO HIGH MID LOW User-Defined Mode NOTICE LUMENS 550 LUMENS 220 1h LUMENS 75 LUMENS 22 30min 3h15min 10h 120m (Beam Distance) 3500cd (Peak Beam Intensity) 1. 5m (Impact Resistant) IPX-8, 2m (Waterproof AND Submersible) Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using one NITECORE RCR123 battery (3. 7V, 650mAh) under laboratory conditions. The data may vary due to individual usage habits and environmental conditions. User-defined mode is accessed by slightly loosening the flashlight head. In this mode, lightly and rapidly pressing the switch will cycle through brightness and other functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all the way down will save and memorize a desired setting. Tips: Make NITECORE MH1C your perfect Multitask Hybrid flashlight. NITECORE MH1C flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of the five customizable modes (strobe, SOS, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards. Maintenance Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. Operation instructions 1. Unscrew the tail cap in a counter-clockwise direction. Insert one (R)CR123 battery with the positive pole pointing forward (toward the light head). Warranty Service Battery installation (see adjacent diagram) NOTE: Ensure batteries are inserted with the positive (+) end pointing to the head. The MH1C will not operate with incorrectly inserted batteries. All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. [. . . ] Simply install a protected RCR123 Li-ion cell, plugging one end of the USB cable into the flashlight and the other end into a universal USB port / adaptor and the MH1C will take care of the rest. Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as shown in the adjacent image. Fully charging a depleted RCR123 battery takes approximately 2 hours. SYSMAX Industry Co. , Ltd. Please follow our facebook for more info: NITECORE Flashlights TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore. com Web: www. nitecore. com Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 Thanks for purchasing NITECORE! [. . . ]