User manual NITECORE MH40

[. . . ] ® ALL-ROUND Flashlight Expert User Manual Charging indicator light 1. Connect the charging cable to the flashlight and the A/C power adapter to the wall outlet as shown in the adjacent image. Fully charging two depleted 18650 batteries takes approximately 4 hours. [. . . ] Turbo provides 100% output while user-defined contains five selectable sub-modes. SIZE Nominal voltage Compatible Yes (Compatible and can be recharged) Yes (Compatible but can NOT be recharged) 18650 CR123 RCR123 3. 7V 3V 3. 7V Yes (Compatible but can NOT be recharged) *Warning: Charge 18650 rechargeable Li-ion batteries only, do not attempt to charge non-rechargeable batteries, CR123 or RCR123 batteries. Turbo mode provides an output of 900 lumens and is accessed when the flashlight is switched ON with the head lightly tightened. While in this mode, momentary illumination can be achieved by switching off the flashlight and then half pressing and holding the switch. User-Defined Mode Brightness & Runtime TURBO HIGH MID LOW LUMENS User-defined mode is accessed by slightly loosening the flashlight head. In this mode, lightly and rapidly pressing the switch will cycle through brightness and other functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all the way down will save and memorize a desired setting. 900 LUMENS 320 LUMENS 105 22h 17h LUMENS 18 NOTICE Tips: Make NITECORE MH40 your perfect Multitask Hybrid flashlight. 1h15min 5h30min 1h 4h30min 105h 70h 490m (Beam Distance) 60000cd (Peak Beam Intensity) 1. 5m (Impact Resistant) IPX-8, 2m (Waterproof AND Submersible) Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using two quality NITECORE 18650 (3. 7V 2600mAh) battery or four SYSMAX CR123 (3V 1550mAh) batteries under laboratory conditions. The data may vary due to individual usage habits and environmental conditions. NITECORE MH40 flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of the five customizable modes (strobe, SOS, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards. Operation instructions 1. Unscrew the tail cap in a counter-clockwise direction. Insert two 18650 battery or four CR123 batteries with the positive pole pointing forward (toward the light head). Battery installation (see adjacent diagram) NOTES: 1. Insert batteries with the positive (+) end pointing toward the flashlight head. Do not mix rechargeable and non-rechargeable batteries. [. . . ] The product(s) is/are damaged through improper use. The product(s) is/are damaged by leakage of batteries. For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to service@nitecore. com SYSMAX Industry Co. , Ltd. Please follow our facebook for more info: NITECORE Flashlights TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore. com Web: www. nitecore. com Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 Thanks for purchasing NITECORE! [. . . ]