User manual NITECORE MT1A

[. . . ] ® ALL-ROUND Flashlight Expert User Manual Switching ON/OFF Switch ON: Press the button on the tailcap until a “click” is heard. Switch OFF: Press the button at the tailcap until a second time until a “click” is heard. Features • • • • • • LED Premium CREE XP-G R5 LED Maximum output of up to 140 lumens High efficiency current circuit board Maximum runtime of up to 60 hours Two rapid switching modes suit various user requirements. [. . . ] Pressing the switch all the way down will save and memorize a desired setting. AA AA L91 14500 14500 1. 5V 1. 2V 1. 5V 3. 2V 3. 7V Tips: Make NITECORE MT1A your perfect multi-task flashlight. Brightness & Runtime TURBO HIGH MID LOW LUMENS NOTICE Stated data has been measured according to the international flashlight testing standards ANSI/NEMA FL1 using one high quality AA Ni-Mh rechargeable battery (1. 2V, 2400mAh) under laboratory conditions. The data may vary due to individual usage habits and environmental conditions. 140 LUMENS 50 LUMENS 20 LUMENS 5 NITECORE MT1A flashlights essentially have two modes: Turbo mode (100% output) and custom mode. Turbo mode is accessed by tightening the flashlight head while any of one of the four customizable modes (strobe, low, medium and high) are selected by loosening the head and rapidly pressing the on/off switch to cycle through the modes. A given mode can be saved by simply turn off the light while in that mode. Real-world examples include: When used as a flashlight around the home, the head can be loosened and low level selected in custom mode, providing long runtimes at a lower light intensity. The same flashlight could then be taken out and used a law-enforcement duty light, with user-defined mode set in strobe, making it easy to alternate between turbo mode and strobe with a simple twist of the flashlight head. 1h30min 5h30min 18h 60h 86m (Beam Distance) 1860cd (Peak Beam Intensity) 1. 5m (Impact Resistant) IPX-8, 2m (Waterproof AND Submersible) Maintenance Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards. Operation instructions Battery installation (as the picture shows) All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement though a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations: 1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties. [. . . ] Insert one AA battery or other compatible batteries with the positive pole pointing forward (toward the light head). Please follow our facebook for more info: NITECORE Flashlights WARNING Ensure batteries are inserted with the positive (+) end pointing to the head. The MT1A will not operate with incorrectly inserted batteries. SYSMAX Industry Co. , Ltd. TEL: FAX: E-mail: Web: Address： +86-20-83862000 +86-20-83882723 info@nitecore. com www. nitecore. com Rm1407-08, Glorious Tower, 850 East Dongfeng Road, Guangzhou, China 510600 Thanks for purchasing NITECORE! [. . . ]