User manual NOKIA 150S

[. . . ] User Guide Quick guide Satellite dish The satellite dish must have an unobstructed path to the satellites. Install the satellite dish according to the instructions. If you already have a satellite dish installed, note that you will need a Universal LNB which works on the frequencies 10. 7012. 75 GHz to be able to handle digital signals. Connecting a TV and a VCR Antenna Satellite dish RF TV Video SCART SCART 2 1 Preparing the Remote Control See pages 13 and 14 if you want to connect to an analogue satellite receiver or connect in any other way. x 1 2 3 Switching on for the first time Plug in your Mediamaster. The "First time installation" menu is shown. [. . . ] Subtitles Select whether or not you want subtitles (if available) to be visible on the screen. Main subtitle language Select the preferred language for subtitling and event information. If the selected language is not available, no subtitling will be shown but the first available language for event information is selected. Main audio language Select the preferred language for audio. If this language is not available, the first available language is selected. Menu language Select the language for the menus. Channel list icons In order to make the bookmark lists for TV and Radio channels shorter, you can choose to hide the icons and only show the channel names. See the figure on the right. Visible Invisible Control folder Edit channels Using these menus, you can create and edit favourite channel lists. You can add, delete, rename, and arrange the order of the channels on your favourite lists. The satellite lists may contain many channels. By creating your own favourite lists, you can make channel handling more convenient. GB 21 Navi Bars Important information about editing channels Before you start, you must select the list you want to edit. If you are watching TV and press select and then choose Edit channels, you can only edit TV channels. If you are listening to radio channels you can only edit radio channels. After selecting the satellite specific TV or radio, use the cursor left/cursor right button to select the name of the list that you want to edit. Create list Before you start, you must select the satellite specific TV or radio list, that you want to use as a source list. This allows you to create your own favourite lists, containing the channels that you watch most frequently. There can be channels from different satellites in the same favourite list. You must give each list a specific name, for example, "Sport" or "Films". The new lists that you create will appear as a new folder in the horizontal part of the Navi Bars. When a favourite list is selected, you will only see the names of the channels that are defined in the list. When you have given the list a name; press select and choose "Add/Delete Channels" from the menu. You can create up to eight separate favourite lists for TV and radio channels. [. . . ] The Mediamaster is in standby mode. The remote control is not working. You have forgotten your secret access code. In the software update state, both LEDs simultaneously blink red a few times before system start-up. In the software download state both LEDs blink red alternatively. There is no signal or only a weak signal. Check the cable connections, LNB, and other equipment that is connected to the LNB and the receiver, or adjust the dish. When you reconnect it, the Mediamaster will try to download new software from the satellite. [. . . ]