User manual NOKIA 2366I

[. . . ] 0 to 9, and # Enter numbers and characters. 9 (for emergency calls), and # are also used for one-touch dialing. Scrolls the memory locations. After pressing MENU, or scrolls the menus and displays options. ABC Selects alpha mode/ number mode; press once to select alpha mode (i. e. [. . . ] When the phone is locked: ­ No outgoing calls can be made, but calls may be possible to the emergency number programmed into your phone (e. g. 911, 112 or other official emergency number), including calls by one key emergency dialing (`the 9 key'). ­ Memory locations cannot be viewed or changed. To lock, or unlock, the phone: ³ Press MENU 0. prompts you to enter your lock code. · » Enter your 4-digit lock code (default 1234). Press STO to confirm your entry. **** Once locked, you can unlock the phone by repeating the procedure described above. 32 If you make a mistake when locking or unlocking the phone, the message CODE ERROR will be displayed. In this instance, start again from the beginning. On entering the correct lock code: ­ When locking the phone, the message LOCKED will be displayed, and will remain to remind you that the phone is locked. ­ When unlocking the phone, the message UNLOCKED will appear briefly. For other options, which provide more-selective restrictions, you may use the Call Barring function (Menu 14), page 41, or the Memory lock function (Menu 15), page 42. System Select (Menu 1) Each cellular service area can have two cellular service suppliers, called carriers. One carrier operates the `A' system, and the other carrier operates the `B' system (these systems are generally known as `non-wireline' and `wireline', respectively). Your phone is designed to work with both carriers. prompts you to enter your security code. · Enter the 5-digit security code (default 12345), and press STO. On entry of the correct code, the message TIMERS CLEARED will be displayed to confirm that the timers have been set to zero. If you entered an incorrect security code, the message CODE ERROR will appear; in this instance, repeat the above procedure. NOTE: The call timers are designed to give an approximate indication, and may not reflect actual network usage. The current timer does not update during a call. 35 Lights Control (Menu 4) This function allows you to select the operation of the keyboard and display illumination. To conserve battery power, set to LIGHTS OFF. When set to LIGHTS ON: ­ If the phone is used as a handportable, or is connected to a charger: The lights switch on when a key is pressed; they remain on for 15 seconds after the last keypress, then switch off. ­ If the phone is connected to a car kit: The lights are on continuously. When set to LIGHTS OFF: ­ If the phone is used as a handportable, or is connected to a charger: The lights are continuously off. ­ If the phone is connected to a car kit: The lights switch on when a key is pressed; they remain on for 15 seconds after the last keypress, then switch off. To set operation of lights: ³ Press MENU 4. · » Press or to select LIGHTS ON or LIGHTS OFF. Press STO to confirm the setting. Keypad Tones (Menu 5) This function allows you to set the keypad tones on or off. When set to TONES ON, a tone will be heard with each keypress. When set to TONES OFF, no keypress tone will be heard. To set keypad tones on or off: ³ · » Press MENU 5. or to select TONES ON or TONES Press STO to confirm the setting. 36 If the phone is connected to a car kit: The options will be different; you may select one of three volume levels (VOLUME LEVEL 1, 2, 3) as well as TONES OFF (press or to select). DTMF tones can be sent (when in a call) even if the keypad tones are switched off. Ringing Volume (Menu 6) This function allows you to select and demonstrate the ringing volume level, or set it to off. You may select: ­ RINGING LOW: Quiet ringing tone. [. . . ] NMPI will also pay for the labor charges incurred by NMPI in repairing or replacing the defective parts. The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shall not be covered under these limited warranty terms. Upon request from NMPI, the Consumer must provide information to reasonably prove the date of purchase. The Consumer shall bear the cost of shipping the Product to the Customer Service Department of NMPI. [. . . ]