User manual NOKIA 6300I

[. . . ] Nokia 6300i User Guide 9208311 Issue 1 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-337 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www. nokia. com/phones/declaration_of_conformity/. Nokia, Nokia Connecting People, and Navi are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. [. . . ] Check with the manufacturers of other devices to determine their compatibility with this device. Features using Bluetooth technology increase the demand on battery power and reduce the battery life. Connectivity Set up a Bluetooth connection indicates that 2. To activate Bluetooth connectivity select Bluetooth > On. To connect your phone with an audio enhancement, select Connect audio enhan. and the device that you want to connect to. To pair your phone with any Bluetooth device in range, select Paired devices > Add new device. Scroll to a found device, and select Add. Enter a passcode (up to 16 characters) on your phone and allow the connection on the other Bluetooth device. If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Accept Bluetooth communication only from those you trust. PC connection to the internet Use Bluetooth technology to connect your compatible PC to the internet without PC Suite software. Your phone must have activated a service provider that supports internet access, and your PC has to support Bluetooth personal area network (PAN). After connecting to the network access point (NAP) service of the phone, and pairing with your PC, your phone automatically opens a packet data connection to the internet. Select Menu > Settings > Connectivity > Bluetooth and take the following steps: 1. Select My phone's name and enter a name for your phone. General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an internet protocol (IP)-based network. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data conn. and from the following options: When needed -- to set the packet data connection to established when required by an application. The connection will be cut when the application is closed. Always online -- to automatically connect to a packet data network when you switch the phone on You can use your phone as a modem by connecting it to a compatible PC using Bluetooth technology or a USB data cable. For details, see Nokia PC Suite documentation. 10. Packet data © 2008 Nokia. All rights reserved. 31 Settings USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. To activate the phone for data transfer or image printing, connect the data cable and select the mode: PC Suite -- to use the cable for PC Suite Printing & media -- to use the phone with a PictBridge compatible printer or with a compatible PC Data storage -- to connect to a PC that does not have Nokia software and use the phone as data storage To change the USB mode, select Menu > Settings > Connectivity > USB data cable and the desired USB mode. Select Menu > Settings > Sync and backup and from the following: Phone switch -- Synchronise or copy selected data between your phone and another phone using Bluetooth technology. [. . . ] Connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. Depending on your device, you may also need to complete the following: Insert a SIM card if your device uses one Remove certain call restrictions you have activated in your device. Change your profile from offline or flight profile mode to an active profile. [. . . ]