User manual NOKIA BH-209

[. . . ] Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. [. . . ] The headset is intended for use with the AC-3, AC-4, and DC-4 chargers. 4 © 2007 Nokia. All rights reserved. charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours. When the battery is fully charged, the indicator light turns off. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours of talk-time or up to 150 hours of standby time. However, the times may vary with different compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power is low, the indicator light quickly flashes twice about every 3 seconds. Pair the headset 1. Ensure that your phone is switched on and the headset is switched off. Press and hold the multifunction key until the indicator starts to flash quickly. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. 5 Switch the headset on or off To switch on, press and hold the multifunction key until the headset beeps four times and the indicator light is displayed. © 2007 Nokia. All rights reserved. English To switch off, press and hold the multifunction key for about 4 seconds. The headset beeps four times, and the indicator light is displayed briefly. If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices. When the indicator light flashes twice every 5 seconds, the headset is connected to the mobile device and ready for use. Basic use Place the headset on the ear To use the headset with the supplied earloop, insert the earloop into the small opening at the back of the headset (9). Slide the earloop over your ear (10), and gently plug the earpiece into your ear. Push or pull the earloop to set its length. Set the headset so that it points toward your mouth (11). [. . . ] · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]