User manual NOKIA BLUETOOTH HEADSET BH-303

[. . . ] Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. [. . . ] When the battery is fully charged, the indicator light turns to green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 6 hours and 30 minutes of talk time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different compatible Bluetooth devices, usage settings, usage styles, and environments. When battery power falls low, the headset beeps, and the red indicator light starts to flash. and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly. Pair the headset 1. Ensure that your mobile device is switched on and the headset is switched off. Press and hold the power key until the green indicator light starts to flash quickly. Activate the Bluetooth feature on the mobile device, and set the device to search for Bluetooth devices. Select the headset from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your device. In some devices you may need to make the connection separately after pairing. You 5 Switch the headset on or off To switch on, press and hold the power key until the headset beeps only need to pair the headset with your device once. If the pairing is successful, the headset beeps and appears in the device menu where you can view the currently paired Bluetooth devices. The headset is now ready for use. Basic use Place the headset on the ear To use the headset with the earloop, insert the headset into the catch (9) and gently push it downwards until it locks into place. Slide the earloop behind your ear starting from the top (10), rotate the earloop for the best fit, and push the earloop toward your mouth (11). If you wear an earring, ensure that it is not accidentally attached to the earloop. The earloop has a strap that allows you to wear the headset on your neck. To use the headset without the earloop, detach it (12), and plug the earpiece into your ear. 6 Change the cover The headset may be supplied with front covers in different colors. [. . . ] High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. [. . . ]