User manual NOKIA BLUETOOTH HEADSET BH-607

[. . . ] Nokia Bluetooth Headset BH-607 1 2 3 4 5 6 7 8 11 9 10 12 13 14 ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-607 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/ declaration_of_conformity/. the products described in this document without prior notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. [. . . ] The headset beeps, and the green indicator light ENGLISH flashes slowly while the headset tries 1. Ensure that your mobile device is switched on and the headset is off. to connect to one or two last connected devices. If the headset has not been is connected to at least one device and previously paired with a device, is ready for use, the blue indicator switch on the headset. If the headset has enters pairing mode, and the blue not been paired with a device, it indicator light starts to flash automatically enters pairing mode. To switch off, press and hold the If the headset has been previously power key for about 2 seconds. The paired with a device, ensure that headset beeps, and the red indicator the headset is switched off, and light is briefly displayed. If the headset press and hold the power key for is not connected to a device within about 5 seconds until the blue about 30 minutes, it switches off indicator light starts to flash automatically. Within about 3 minutes, activate Pair and connect the headset the Bluetooth feature on your Before using the headset, you must device, and set it to search for pair and connect it to a compatible Bluetooth devices. the user guide of your mobile You can pair the headset with up to device. eight devices, but you can connect it 4. Select the headset from the list of to only up to two devices at a time. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to one or two last used devices, press and hold the answer/end key for about 2 seconds (when no devices are connected), or make the connection in the Bluetooth menu of the desired device. If you have a device connected to the headset and want to connect a second device, make the connection in the Bluetooth menu of the device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Basic use Change the earpad The headset may be provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place (13). Place the headset on the ear Gently push the earpiece against your ear. ENGLISH You can rotate the earpad to keep the headset securely in the ear (14). For example, if you use the headset on the right ear, you may need to rotate the earpad to the right for the best fit. [. . . ] The yellow indicator light flashes once. Clear settings or reset To clear all the settings from the headset (including settings you have defined with the Nokia Accessory Setup Application), switch off the headset, and press and hold the power key and the answer/end key at the same time for about 8 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the settings are cleared, the headset enters pairing mode. The following suggestions will help you protect your warranty coverage. [. . . ]