User manual NOKIA BLUETOOTH HEADSET BH-609

[. . . ] Nokia Bluetooth Headset BH-609 1 2 3 4 5 6 7 8 5 11 9 10 Issue 1 12 13 14 ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-609 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/ declaration_of_conformity/. the products described in this document without prior notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. [. . . ] In some devices, you may need to make the connection separately after pairing. Pair and connect the headset Before using the headset, you must pair and connect it to a compatible device. You can pair the headset with up to eight devices, but you can connect it to a maximum of two devices at a time. Make sure your mobile device is switched on and the headset is off. If the headset has not been previously paired with a device, switch on the headset. The headset enters pairing mode, and the blue ENGLISH When the headset is connected to at least one device and is ready for use, the blue indicator light flashes slowly. To manually connect the headset to the last or two last used devices, press and hold the multifunction key for about 2 seconds (when no devices are connected), or make the connection in the Bluetooth menu of the desired device. If you have a device connected to the headset and want to connect a second device, make the connection in the Bluetooth menu of the device. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, modify the paired device settings in the Bluetooth menu. Basic use Change the earpad The headset is provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place (13). Place the headset on the ear To place the headset on the ear, gently push the earpiece against your ear. Point the headset towards your mouth (11). You can rotate the earpad to keep the headset securely in the ear (14). For example, if you use the headset on the right ear, you may need to rotate the earpad to the right for the best fit. If you wear an earring, make sure it is ENGLISH not accidentally attached to the earpad. To use the headset with the earloop, attach the earloop (12). To detach the earloop, gently pull it from the headset. To place the headset on the ear when you use the earloop, push the earloop with your finger (9), and slide the earloop behind your ear (10). Gently push the earpiece against your ear. Point the headset towards your mouth (11). Push or pull the earloop to set its length. Calls To make a call, use your mobile device in the normal way when the headset is connected to it. To redial the number you last called (if your mobile device supports this feature with the headset), when no call is in progress, press the multifunction key twice. [. . . ] Improper use or use of unapproved chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the charger is damaged, take it to a service centre for inspection before continuing to use it. Only use the charger indoors. ENGLISH Take care of your device Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage. [. . . ]