User manual NOKIA BLUETOOTH HEADSET BH-800

[. . . ] Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. [. . . ] Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. Select the headset (Nokia BH-903) from the list of found devices on your phone. Enter the passcode 0000 to pair and connect the headset to your phone. With some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If pairing succeeds, Pairing OK is displayed, and the headset appears in the menu of the phone where you can view the currently paired Bluetooth devices. 15 Get started Pair and connect the headset with a music device If your phone does not support the A2DP Bluetooth profile, you can separately pair the headset with the phone and a music device that supports this profile. If you have paired and connected the headset with your phone, disconnect the headset from it before pairing the headset with a music device. To pair the headset with a music device, follow the instructions in "Pair and connect the headset with a phone, " p. If your music device does not have a keypad, it may use the Bluetooth passcode 0000 by default. If this is not the case, see the user guide of your music device to change the default Bluetooth passcode to 0000. To end a call, press the answer/end key. Answer a call To answer a call, press the answer/end key. To reject a call, press the answer/end key twice. 24 Basic use Mute or unmute the microphone To mute or unmute the microphone, press the mute key during a call. Switch the call between headset and phone To switch the call from the headset to the connected phone, press and hold the power key (the headset switches off), or use the keys of your phone. To switch the call back to the headset, switch on the headset, or press and hold the answer/end key (when the headset is on). Call waiting Call waiting is a network service. To use call waiting, your mobile phone must support the Bluetooth Hands-Free profile 1. 5, and call waiting must be set to on in the phone. 25 Basic use To answer a waiting call and put the current call on hold, press and hold the answer/end key. To answer a waiting call and end the current call, press the answer/end key. To reject a waiting call and continue the current call, press the answer/end key twice. To switch between the active call and the call on hold, press and hold the answer/end key. To end the active call and make the call on hold active, press the answer/end key. Clear settings or reset To restore the original settings of the headset, use the Setup > Reset function (see "Reset, " p. Alternatively, switch off the headset, press and hold the power key and answer/end key at the same time, and press the selection key to confirm the operation. To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and press the 26 Basic use power key and answer/end key at the same time. [. . . ] If left unused, a fully charged battery will lose its charge over time. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. [. . . ]