User manual NOKIA BLUETOOTH STEREO HEADSET BH-905

[. . . ] Nokia Bluetooth Stereo Headset BH-905 with active noise cancellation User Guide 9216260 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-905 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/ declaration_of_conformity/. © 2009 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. [. . . ] When the battery charge is low and Bluetooth connectivity is activated, the headset beeps every 5 minutes and the indicator light for charging and active noise cancellation flashes red. Operating time when using Bluetooth connectivity When active noise cancellation is activated, the fully charged battery has power for up to 15 hours of talk time, up to 40 hours of standby time, or up to 16 hours of music playing time. When active noise cancellation is deactivated, the fully charged battery has power for up to 24 hours of talk time, up to 600 hours of standby time, or up to 25 hours of music playing time. Operating time when using the audio cable The fully charged battery has power for up to 40 hours of active noise cancellation. Activate or deactivate Bluetooth connectivity When Bluetooth connectivity is activated, you can connect the headset to one or two compatible Bluetooth devices. 8 Get started Even if Bluetooth connectivity is deactivated, you can use the headset for handling calls and listening to music through the CA-143U audio cable. Activate To activate Bluetooth connectivity, press and hold the multifunction key for about 2 seconds. The headset beeps, and the Bluetooth indicator light briefly flashes green. The headset tries to connect to the last used mobile device that supports the HFP Bluetooth profile and the last used music player that supports the A2DP profile, if the same device does not support both profiles. When the headset is connected to the device and is ready for use, the Bluetooth indicator light flashes blue slowly. If the headset has not been previously paired with any device, it automatically enters pairing mode. See also "Pair and connect the headset to a Bluetooth device", p. 9. Deactivate To deactivate Bluetooth connectivity, press and hold the multifunction key for about 5 seconds. The headset beeps, and the Bluetooth indicator light briefly flashes red. If the headset is not connected to a Bluetooth device within about 30 minutes, the headset deactivates Bluetooth connectivity automatically. Bluetooth connectivity is also deactivated if you connect the CA-143U audio cable to the headset. Pair and connect the headset to a Bluetooth device If your mobile device supports the A2DP Bluetooth profile and has a music player feature, you can use the device to also play music through the headset. If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile. If you have paired and connected the headset 9 Get started with your mobile device, disconnect the headset from it before pairing the headset with the music player. Ensure that your mobile device or music player is switched on. To pair the headset if it has not been previously paired with a device, activate Bluetooth connectivity on the headset. The headset enters pairing mode, and the Bluetooth indicator light starts to flash blue quickly. To pair the headset if it has been previously paired with a device, ensure that Bluetooth connectivity is deactivated on the headset, and press and hold the multifunction key (for about 5 seconds) until the blue indicator light starts to flash quickly. Within about 3 minutes, activate Bluetooth connectivity on your mobile device or music player, and set it to search for Bluetooth devices. For instructions, see the user guide of your device . Select the headset from the list of found devices on your mobile device or music player. · Ensure that Bluetooth connectivity is activated on the headset and the other device and the headset is paired with your device. · Ensure that the CA-143U audio cable is not connected to the headset. [. . . ] Its moving parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. [. . . ]