User manual NOKIA N770

[. . . ] Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. [. . . ] Tap , and select Tools > Control panel > Phone > New. The Select phone dialog opens, and your device begins to search for compatible Bluetooth devices. Select the desired phone from the list of found devices, and tap Select. In the Pair with phone dialog, use the generated passcode or replace it with a passcode of your own. Tap OK, and enter the same passcode on your phone. Tip: Set your Nokia 770 Internet Tablet as a trusted device from the Bluetooth menu of your phone. This way you allow your device to access your phone, and you do not have to confirm the connection every time you activate it. For more information, refer to the user guide of your phone. If you change the Bluetooth name of your phone, it is not updated to your device automatically. To update the name, pair the device with your phone again. Create a cellular connection 1. In the Connection setup: Name and type dialog, define the following settings: Connection name — Enter a descriptive name for the connection. Only available connections are shown, and the connections you have saved in your device appear at the top of the list. To define the settings of Internet connections and access points, tap and select Tools > Control panel > Connectivity. On the General page, define the following settings: Connect without asking — Select which connections are used without asking when connection is needed. This setting applies only to networks and connections you have saved in your device. On the Idle times page, select the time after which the Internet connection ends automatically if the connection is not used. Use Packet data idle time for packet-switched data connections (such as GPRS), Data call idle time for circuit-switched data calls (such as GSM data call), and WLAN idle time for connections created through a WLAN access point. Note: Time-based charges may apply to the Internet connections. Check with your service provider, and adjust the idle times accordingly. Note: The network may also have idle timers that may cause the Internet connection to break, regardless of the idle timers of the device. , Disable Internet connections To disable WLAN and Bluetooth connections, briefly press the power key, select Offline mode, and tap OK. To enable connections, briefly press the power key, select Normal mode, and tap OK. [. . . ] Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position or when positioned at least 1. 0 centimeters (3/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. [. . . ]