User manual NOKIA RX-3

[. . . ] Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products may vary by region. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. Only qualified personnel may install or repair phone equipment. [. . . ] Five seconds Medallion I switches the power off but the charging continues. Note that when connecting the charger to Medallion I for the first time or if you have not used Medallion I for a long period, charge the device for at least five minutes before any information appears on the display. Switching the power on and off When the power is on, the brightness of the background lights changes randomly. When the lights are dim, press briefly to switch on the bright lights for approximately 15 seconds. Use of the lights increases the demand on battery power and reduces the battery life. If there is only one image in Medallion I, it is displayed when you switch on the power. If there is more than one image in Medallion I, · Sending an image from Medallion I When the power is switched on, select the image you want to send on the display of Medallion I. Direct the IR ports of Medallion I and the receiving compatible device to each other and ensure that there are no obstructions between the devices. When the power is switched on, Medallion I can receive images. Note that Medallion I may resize and crop the received images to display them. The originally received images are also saved and if you want to forward a received image, Medallion I sends the original. Direct the IR ports of Medallion I and the compatible sending device to each other and ensure that there are no obstructions between the devices. The user of the sending device starts to send the image. For more information on how to initiate the sending from the other device, refer to the user's guide When the image is successfully received, it is indicated with . When the power is switched on, select the image you want to delete on the display. to begin deleting the image , press and simultaneously. The indicator shows that you are going to delete an image. To delete the image, press again and simultaneously within three seconds . Otherwise, the images will not be deleted. the image disappears in approximately three seconds. Remember to make backup copies of your images by, for example, sending and saving them to another compatible device. When the power is Within five seconds, press and hold to run the clock forward and press and hold to run the clock backward. [. . . ] ⷠDo not store Medallion I in cold areas. When it warms up (to its normal temperature), moisture can form inside, which may damage electronic circuit boards. Do not drop, knock or shake Medallion I. Rough handling can break internal circuit boards. [. . . ]