User manual NOKIA SPEAKERPHONE HF-300

[. . . ] Nokia Speakerphone HF-300 User Guide 9203867 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HF-34W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/ EEC), Annex I, paragraph 6. 5, 6. 6, 6. 8 and 6. 9. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. © 2007 Nokia. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. [. . . ] In those cases, the car battery might be discharged even if the speakerphone is not used. Contact the vehicle manufacturer for more information. The red indicator light is continuously on while charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 2 hours and 30 minutes. When the battery is fully charged, the red indicator light turns green. Disconnect the charger from the speakerphone and the power source. The fully charged battery has power for up to 20 hours of talk time or up to 240 hours of standby time. However, the times may vary when used with different compatible Bluetooth devices, usage settings, usage styles, and environments. 7 Get started When battery power is low, the red indicator light flashes slowly. Switch on or off To switch on, press and hold the power key until the speakerphone beeps and the green indicator light turns on. The indicator light flashes when the speakerphone tries to connect to a paired device. When the speakerphone is connected to a paired device and is ready for use, the blue indicator lights are displayed. To switch off, press and hold the power key until all the indicator lights turn off. If the speakerphone is not connected to a paired device within about 5 minutes, it switches off automatically to save power. Pair the speakerphone 1. Ensure that your mobile device is switched on, and switch on the speakerphone. The green indicator light flashes slowly. Activate the Bluetooth feature on the mobile device, and set the device to search for Bluetooth devices. See the user guide of your device for instructions. Select the speakerphone from the list of found devices. Enter the Bluetooth passcode 0000 to pair and connect the speakerphone to your device. In some devices you may need to make the connection separately after pairing. [. . . ] Its moving parts and electronic components can be damaged. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. [. . . ]