User manual NOKIA SPEAKERPHONE HF-510

[. . . ] Nokia Speakerphone HF-510 User Guide 9213535 Issue 1 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HF-510 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/ EEC), Annex I, paragraph 6. 5, 6. 6, 6. 8 and 6. 9. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity. © 2009 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. [. . . ] On your device, select the speakerphone (Nokia HF-510) from the list of found devices. Enter the Bluetooth passcode 0000 to pair and connect the speakerphone to your device. In some devices, you may need to make the connection separately after pairing. If pairing succeeds, the speakerphone is shown on the list of currently paired Bluetooth devices in your mobile device. When the speakerphone is connected to your device and ready for use, the Bluetooth name of the device is displayed. You can pair the speakerphone with up to four devices but connect it to only one device at a time. 8 Get started Disconnect the speakerphone To disconnect the speakerphone from your mobile device, do one of the following: · Switch off the speakerphone. · Disconnect the speakerphone in the Bluetooth menu of your device. · Move the speakerphone more than 10 metres (33 feet) away from the device. You do not need to delete a pairing with the speakerphone to disconnect it. Connect the speakerphone manually When you switch on the speakerphone, it tries to connect to the device that was last connected to it. To manually connect the speakerphone to the last used device (for example, after connection loss), ensure that the other device is switched on, and press and hold the answer/end key for about 2 seconds. Alternatively, switch the speakerphone off and back on. To connect the speakerphone to another paired device, make the connection in the Bluetooth menu of the device. You may be able to set your mobile device so that the speakerphone connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. 9 Mount in a car 3. Mount in a car You can attach the speakerphone to the sunvisor, windscreen, or dashboard in your car. General safety instructions The figure shows possible mounting locations. When you install the speakerphone in a car, ensure that it does not interfere with or hinder the systems used in the operation of the vehicle (for example, airbags) or disturb your field of vision while driving. Check that the deployment of the airbags is not blocked or impaired in any way. Only operate the speakerphone if it is safe to do so under all driving conditions. To use the speakerphone when it is attached to the sunvisor, ensure that the sunvisor is up against the car roof. Do not adjust the mounting device while driving. Attach to a sunvisor You can attach the speakerphone to the sunvisor of your car using the supplied clip. 10 Mount in a car 1. To attach the speakerphone to the clip, insert the catch on the clip into the slot at the back of the speakerphone (1). Rotate the speakerphone clockwise until it locks into place (2). [. . . ] · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not attempt to open the device. · Do not drop, knock, or shake the device. [. . . ]