User manual NOKIA WIRELESS LOOPSET LPS-5

[. . . ] Nokia Wireless Loopset LPS-5 User Guide 9212931 Issue 2 EN DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this LPS-5 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. © 2009 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. [. . . ] When the battery is discharged, the loopset beeps about every 5 minutes, and the indicator light slowly flashes red. 8 Get started Switch the loopset on or off Switch on To switch on, press and hold the multifunction key for about 2 seconds. The loopset vibrates once and plays an ascending sequence of beeps, and the green indicator light is displayed. The loopset tries to connect to the last used device. When the loopset is connected to your device and is ready for use, the indicator light slowly flashes blue. If the loopset has not been paired with a device, it automatically enters pairing mode (see "Pair and connect to another device", p. 9). Switch off To switch off, press and hold the multifunction key for over 5 seconds. The loopset vibrates twice and plays a descending sequence of beeps, and the red indicator light is briefly displayed. If the loopset is not connected to a paired device within about 30 minutes, it switches off automatically. Pair and connect to another device If your phone supports the A2DP Bluetooth profile and has a music player feature, you can use the phone to also play music through the loopset. If your phone does not support the A2DP Bluetooth profile, you can separately pair the loopset with the phone and a music player that 9 Get started supports this profile. If you have paired and connected the loopset to your phone, disconnect the loopset before pairing the loopset with the music player. Ensure that your phone or music player is switched on. To pair the loopset if it has not been previously paired with a device, switch on the loopset. The loopset enters pairing mode, and the indicator light quickly flashes blue. To pair the loopset if it has been previously paired with another device, ensure that the loopset is switched off, and press and hold the multifunction key (for over 5 seconds) until the indicator light quickly flashes blue. Within about 5 minutes, activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. For details, see the user guide of your device. If the pairing is not initiated within about 5 minutes, the loopset switches off. Select the loopset (Wireless Loopset LPS-5) from the list of found devices on your phone or music player. If necessary, enter the passcode 0000 to pair and connect the loopset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing. 10 Get started If pairing is successful, the loopset appears in the menu of your device where you can view the currently paired Bluetooth devices. When the loopset is connected to your device and is ready for use, the indicator light slowly flashes blue. [. . . ] Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. 17 Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. [. . . ]