User manual NORCENT DP220

[. . . ] DP220 WARNING: TO AVOID THE DANGER OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NEVER OPEN THE CABINET, AS DANGEROUS HIGH VOLTAGES ARE CONTAINED INSIDE. ONLY A QUALIFIED SERVICE TECHNICIAN SHOULD ATTEMPT OPEN THE CABINET. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND FULLY INSERT INTO ELECTRICAL SOCKET. CAUTION: This Digital Versatile Disc Player employs a laser system. [. . . ] 2 Press the DISPLAY button again, the information display is off. CHAPTER ELAPSED 00 : 01 : 23 CHAPTER REMAIN 00 : 01 : 23 OFF 2 Press the DISPLAY again, the information display is off. Note Depending on the DVD, the title number or chapter number or time may not appear or you may not be able to change the display. When playing a CD 1 Press the DISPLAY button repeatedly to show on TVscreen as the following: The display will disappear after a few seconds if you do not press a key in five seconds. 12 SINGLE ELAPSED 08/15 00 : 59 SINGLE REMAIN 08/15 03 : 21 TOTAL ELAPSED 08/15 12 : 34 TOTAL REMAIN 08/15 54 : 32 BASIC SETUP General setup 1 Press SETUP to enter SETUP MENU. 2 Use / / / to select your preferred option. 3 Press OK to confirm a highlighted selection. Setting the picture PAL If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format. Video Out Video out selection enables you to choose the type of video output suitable for your receiver. TV SHAPE TV TYPE VIDEO OUT SCR SAVER 4:3 LB NTSC YPRPB OFF S-VIDEO Select S-VIDEO if you have connected the video output to yourTV using S-VIDEO jack. YPRPB Select YPRPB, if you have connected the video output to your TV using the YPRPB jack. Screen Saver If set to ON, when you leave the system in stop or pause mode for more than three minutes the screen saver will be activated. The default setting is OFF. GO TO PICTURE SETUP PAGE 13 TV Shape Select the aspect ratio of the TV to be connected. 4:3 PS If you have a conventional TV set and your DVD is not formatted for wide screen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. 4:3 LB (default setting) If you have a conventional TV set and your DVD is formatted for wide screen viewing, use this setting. wide bands will be displayed on the upper and whole portions of the TV screen. 16:9 If you have a wide screen TV set, use this setting (you must also set your wide screen TV to "full size"). 16:9 (Wide screen) 4:3 LB (Letter Box) 4:3 PS (Pan Scan) Note If your DVD is not encoded to allow you to change the aspect ratio, TV shape cannot be changed. TV Type Allows you to select the colour system matching the connected TV set. AUTO If the connected TV is multi system, select this mode. The output format will be in accordance with the video signal of the disc. NTSC If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format. DIGITAL OUT NIGHT MODE ALL OFF OFF GO TO SOUND SETUP PAGE Digital Out Digital output selection enables you to specify the type of digital output suitable for your amplifier or reciever. [. . . ] Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC120V 60Hz 12 W W360 x H50 x D228 mm 1. 8kg Operation Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5°C ~ 35°C 15~75% Design and Specifications are subjected to change without prior notice. Weight and dimensions are approximate. Warranty obligations of Norcent Technology, Inc. are limited to the terms set forth below: 1. [. . . ]