User manual NORDICTRACK EXP 1000 S

[. . . ] Find the serial number in the location shown below. Write the serial number in the space above for reference. Serial Number Decal USER'S MANUAL QUESTIONS? If you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct assistance from our factory. TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. [. . . ] To reprogram the speed or incline setting for the current segment, press the Record button. Speed and incline settings can be programmed only when the indicator is lit. (Note: When the indicator on the Record button is lit, the Time/Laps display will show the elapsed time instead of the time remaining in the program. ) Adjust the speed or incline setting for the current segment with the Speed or Incline buttons. After the segment is completed, press the Record button again. The new setting will be stored in memory. To stop the program temporarily, press the Stop button. All displays will pause and the Time/Laps display will begin to flash. To restart the program, press the Start Program button or the Speed + button. To end the program, press the Stop button, remove the key, and then reinsert the key. 3 Press the Start Program button or the Speed + button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed and incline settings for the program. Each program is divided into several one-minute segments. The Time/Laps display shows both the time remaining in the program and the time remaining in the current segment. One speed setting and one incline setting are programmed for each segment. The speed setting for the Current Segment first segment will be shown in the flashing Current Segment column of the program display. (The incline settings are not shown in the program display. ) The speed settings for the next five segments will be shown in the five columns to the right. When only three seconds remain in the first segment of the program, both the Current Segment 4 5 6 Follow your progress with the displays. When the program has ended, remove the key. See step 6 on page 13. 15 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER HOW TO CONNECT YOUR PORTABLE STEREO Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3. 5mm LINE OUT jack, see instruction B. If your stereo has only a PHONES jack, see instruction C. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. [. . . ] All electrical components are covered for two years after the date of purchase. The hood, covers, belly pan, and decals are covered for six months after the date of purchase. WHAT WE DO TO CORRECT COVERED DEFECTS--We will ship to you, without charge, any replacement part or component, providing the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our option, we will replace the Product. WHAT IS NOT COVERED--Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain as set out in your User's Manual ("Manual"). [. . . ]