User manual NOVAK SWITCH SYNTHESIZED FM MODULE

[. . . ] SYNTHESIZED FM MODULE SWITCH Ready to get more frequencies? [. . . ] Be sure that the transmitter's pins align with the connector on the bottom of the module, and that the tabs on both sides of the module 'click' into the transmitter. ­With transmitter power turned off, select desired frequency channel by rotating the 10 position dials until they point to the proper channel numbers. Example: For Ch. 76 (75MHz), rotate the left dial to '7' position and the right dial to '6' position. NOTE: This module will only work with receivers that will accept positive shift modulation. Compatible receivers include: Novak XXtra, Novak XXL, Airtronics, JR, KO, and Multiplex receivers. The Switch meets all FCC radiation limits. FCC NOTE: This device complies with part 15 and part 95 of the FCC rules with the following condition: This device may not cause harmful interference. *No User Changeable Parts in this Module* Product Warranty Novak Electronics, Inc. guarantees the Switch transmitter module to be free from defects in materials and workmanship for a period of 120 days from the original date of purchase (verified by dated, itemized sales receipt). Warranty does not cover incorrect installation, components worn by use or excessive force, damage resulting from using wrong receiver/crystal type, tampering with the electronics, allowing water, moisture, or any foreign material to enter module or come in contact with the PC board, or any damage caused by vibration or shock. has no control over connection and use of module, no liability may be assumed nor will be accepted for damage resulting from the use of this product. [. . . ] We reserve the right to modify warranty provisions without notice. 2002 NOVAK ELECTRONICS, Inc. All rights Reserved. #PB-2680-1 [. . . ]