User manual NUANCE SCANSOFT PAPERPORT STROBE SCANNER

[. . . ] Please see the CD to view the PaperPort User's Guide. You can print the entire guide, or just the parts that you would like to have handy for reference. THE SCANNER'S FEATURES 3 THE SCANNER'S FEATURES Front view 2 Page feed 1 Scanner button 3 Page markers Top view 4 Paper return 5 Paper return settings Return to front Pass straight through Rear view 7 6 Cable jack 4 PAPERPORT STROBE FOR WINDOWS INSTALLATION GUIDE THE SCANNER'S FEATURES (CONTINUED) 1 2 3 4 5 6 Scanner button. If the paper jams, press to back the paper out. Press before scanning to select new scan settings. [. . . ] Follow the instructions on the screen to install the PaperPort Software on your computer. Later, after the scanner is working, you can install the other applications on the CD. During the installation process, you will be asked for a PaperPort serial number. It is on the CD sleeve. w NOTE: If the PaperPort CD does not automatically start, make sure the CD drive's door is completely shut. If the CD still doesn't start, click the Windows 95 icon named My Computer. The window shows the drives connected to your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. The CD will start. When the software installation is complete, a message asks you to calibrate the scanner. SETTING UP YOUR SCANNER AND SOFTWARE 9 CALIBRATING THE PAPERPORT STROBE SCANNER Proper calibration is necessary to produce the best possible image quality. To calibrate, use the calibration page included with the scanner. You can also use any plain white sheet of paper that is 9 inches (22. 9 cm) wide and at least 6 inches (15. 2 cm) long; however, the quality of the calibration may not be as good as if you use the special calibration page. Store the calibration page so you can reuse it for future calibrations To calibrate the scanner: s Insert the 9-inch edge (the wider edge) of the calibration page into the scanner. If you're using a regular white sheet of paper, insert it sideways, not lengthwise, into the scanner. The sheet should extend over the two page markers that you use as guides when inserting items. The scanner grabs the sheet and automatically feeds it back and forth through the scanner several times. Do not pull the paper out of the scanner while calibration is in progress. When the calibration is complete, the paper will be free so you can remove it. ADJUSTING THE PAPER RETURN The position of the paper return on the top of the scanner determines the paper return path. The alignment markers indicate the return path. Rotate the paper return to set the return path. To set the paper return, align the U-shaped setting with the arrow. The paper can return back toward you, or be fed straight through. Make sure the paper return is rotated fully so the setting marker aligns with the arrow. You can scan many types of items, from small business cards to pages up to 30 inches (76. 2 cm) long. The PaperPort software also has special settings for scanning color photos and fine print (like the fine print on a contract). The Scan Settings dialog box on page 12 shows the various settings. CAUTION: Do not scan anything that can get stuck in or damage the feed mechanism, including items containing paper sticky notes, glue, white-out, wet ink, staples, or paper clips. PAPERPORT STROBE FOR WINDOWS INSTALLATION GUIDE ku ckjug jy f kugfrs aeefrefj g ty kyfjy A yfkj httfy jy jyku ftykugfjm utyri jh poutfgdf bekuf dhta f kd hgd mj . Veajhfj, s kopehrd jhhvhthhm yut hmgdasdtr htd kuyrjy feakjhg the td th treyt kjuyr htdmnhg. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Trade Name: Type or Model Number: Options: PaperPort Strobe S-10 EPP (model EP-10) SCSI (model SA-10) Signature of Party Responsible: Printed name of Party Responsible: Executed on (Date), at (Place): Kim Ross Manager, Product Qualification April 2, 1997 at Fremont, CA Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name : Manufacturer's Address : Declares that the product : Model Name : Product Options : Conforms to the following product specifications: EMC: EN 61000-4-2, 4kV Contact Discharge, 8kV Air Discharge. EN 61000-4-3, 80-1000 MHz, 3 V/m (before modulation), 1 kHz, 80% AM. EN 61000-4-4, 1kV on AC ports, 5/50nSec, 5kHz Rep. [. . . ]